Control 2 motors Forward and reverse remote control switch

Description

                       Note: Customized design is acceptable, we have professional technology-support!
 
Package included:
 

• 1 x Receiver: MOT*-DC
• 1x Transmitter: HR6
• 1 x User manual

• Wireless control, easy to install
• Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC **0~**0V or DC 0~*8V.
• You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
• With characteristics of over current protection, short-circuit protection and temperature protection.
• Audible / visual indication
• Use microcontroller model of EM*8P**6, an *-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
• Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an *-bit code.
• One/several transmitters can control one/several receivers simultaneously.
• If you use two or more receivers in the same place, you can set them with different codes.
• Transmitting Frequency: The default frequency is **5MHz ,we can also provide **3MHz, you can leave us a message or contact us if you need.
   

• Model No.: MOT*-DC
• Channel: That can control two motor Forward and Reversion
• Control Modes: Momentary
• Coding Type: Fixed code
• Coding Setting: By learning
• Power Supply (Operating Voltage): DC*2V, we can also provide DC*9V or DC*4V,please contact us if you need.
• Working Voltage Range of Relay: AC **0~**0V or DC 0~*8V
• PCB size: *4mm x *3mm x *0mm
• Case size: **0mm x *0mm x *0mm
• Maximum Working Current: *0A
   

• Model No.: H6
• Channel: 6 CH
• Remote Control Distance: ***0m / ***0ft (theoretically)
• Encode: Fixed code by Soldering
• Unit size: **5mm x *4mm x *5mm
• Power Supply: 1 x 6F*2 *9V battery (included, can be used for *2 months)

• Learning the button of remote control:
  1) Press the button of receiver; signal LED on the receiver keeps shining. The receiver enters into status of LEARNING.
  2) Press any one button on remote control. If signal LED flashes quickly *5 times and turns off, it means learning is successful.
  3) When receiver is in the status of LEARNING, press again the button of receiver, signal LED turns off, learning process will be discontinued.
  4) The receiver can learn several remote controls with different codes.