Description
DIN ***3 disc spring
1. DIN***3 standard.
2. Material: SAE***0(SAE***4) SiCrV4 SUS.
3. Certificate: ISO********8
SAE***0 SiCrV4 SUS Flat Metal Gasket Disc Springs Plating
Disc Spring Washer, with all of their variations, are among the
most widely used tension generating washers. They are used for
spanning alignment holes, distributing bearing loads and for
generating and sustaining the tension needed to hold assemblies
together. When loaded to flat, their yield point may be exceeded.
These washers, however, are often used in applications where they
function entirely within their elastic range.
By varying thickness and crown height relationships, design
engineers meet a wide range of load/deflection requirement with
Disc Spring washers.
Description:
Disc Springs are conically formed angular Discs, which are loaded
in the axial direction. Disc Springs offer a well-developed
solution to many engineering problems. Through a unique combination
of high force in a small space, Disc Springs can be used as single
disc or arranged in stacks. A spring stack can consist of either
single spring or parallel spring sets. Disc Springs are available
with or without contact flats. Disc Springs and Belleville Washers
are manufactured to DIN ***3 AND DIN ***6. We have computerized
design programmed to assist our customers for their specified
applications. Disc Springs are manufactured from imported *0CRV4
material. Our Disc Springs are AUSTEMPERED. This method of heat
treatment is particularly effective for springs, as it gives the
maximum toughness and therefore considerable durability.
Advantages of Disc Springs
-No Deformation or Fatigue under normal loads.
-High Energy Storage Capacity.
-Long Service Life.
-Stock keeping is minimized as the individual spring sizes can be
combined universally.
-Space Saving.
-Largely Self-damping, giving good shock absorption and energy
dissipation.
-Efficient use of space and high spring force with small
deflections.
-Adaptable to stacking in numerous configurations.
-Combination use as a modular spring element.
-Low Maintenance cost
-Greater Security
Applications:
Disc Springs offer a well-developed solution to many engineering
problems. Through a unique combination of high force in a small
space, Disc Springs can be used as single disc or arranged in
stacks.
Material:
*5CrSi or *0Si2Mn, Carbon, steel, music steel, chromium alloy steel
wire, and stainless steel, etc
Finish:
Polishing, zinc plating, nickel plating, chrome plating
Competitive Advantage:
High quality & high service
