Sell decapper brush barrel machine

Description

Adapting to the needs of manufacturers of mineral water factory and pure water plants , this equipment changes the tedious process of handling the empty barrel into a simple automation. The device's performance is reliable , and the operation is easy , and it's easy to maintained. The series machine use *5x2mm Stainless Steel Square Tubular welded frame, transmission, pneumatic directional plug cover body, electrical control and water storage tank and other parts. 
With smooth wear resistance, corrosion and other features. 
1, set of brushes, within and outside the wash in one, three parts completed in the same cycle, save time , effort and electricity. 
2, According to the water supply, the user can choose reasonable mode of circular and non - circulating water supply and water supply, dual water supply. 
3, good scrubbing, this machine is suitable for internal and external wall of the barrel body omni - directional effective cleaning. 
4, simple operation, just an operation to open and close the door, and you can complete the cleaning process. 
Brush bucket and pluck cover technical parameters : 
Six brushes ( exterior and interior, top, bottom ); One Pull; one brusher; the bucket match to 5 gallons; Processing rate is ******0 barrels / hour; Motor power 1.1kw, Weight **0kg. 
Specifications
It is suitable for pulling out the lid from the barrel, without damnification to the bottleneck and lid
Automatic pull cap is specially designed for 5 gallon water filling line. It is suitable for pulling out the lid from the barrel, without damnification to the bottleneck and lid, and the lid can be recycled. The machine’s head is made by special technology and material, and it can be used alone or on-line to achieve pipeline operations. The machine is controlled by PLC and can check whether there is a cap or not automatically. This equipment greatly reduces the secondary pollution, which is caused by manual operation and significantly improves labor efficiency.
5 Gallon Barrel Pull Cap Machine:
1) Adopting PLC and pneumatic cylinder, it can work in line . Decapper head does not hurt cap and bottle mouth at all. So cap can be re-used. Capacity is adjustable. It is compatible with a wide range of bottle height and cap diameter.
2) With the barrel controlled by photoelectrical signal. Under the condition that no barrel or the outlet of cap-removing machine is jammed, the barrel will be transferred to the lower part of the cap-removing head by transferring belt for automatic positioning.
3) The cap-removing head consists of four pieces of arch covers. The head is open and pressed on the opening of the barrel. With four pieces of arch covers tightened and locking the edge of the bucket opening in a fast way. After that, the barrel is raised and the cap is removed. Then it is released automatically, with cap blown to the collective sink by air.
4) During the process of cap-removing, the edge of the barrel will not be damaged.
5) The whole process is controlled by computer.
Simple description: 
This series machine is our company based on advanced technology from abroad, they are auxiliary equipments for barreled water production line. It has advantages of high degree automation, high efficiency and perfect reliability. It is the good ideal auxiliary equipment for barreled water production line. 
Specifications 
1.Automatic 5 gallon barrel 
2.Easy operation and maintenance 
After leakage checked, barrels are transferred and then checked by a sensor switch until 2 barrels wait online. This 2 barrels will be pushed into brushing heads by a pusher to have inside and outside brushing with bottom-up. Inside brusher will go upside to brush and outside brusher rotary brushing, to brush inside and outside barrels completely.