Description

Infant Incubator
TI***0 Infant Incubator

Standard Composition:

- Servo Control Mode: air temp;
- Instant Parameter Displaying: set temp, air temp, heat power rate;
- Audible & Visual Alarms: power failure, sensor failure, higher/lower temp, air temperature override, fan failure;
- Power failure reset memory and self-test function;
- Hood with dual slope: 4 hand-ports.

SPECIFICATION POWER
Model TI*****1E.........**0 / **0 Vac, *0Hz / *0Hz
Model TI*****2E.........**0 / **0 Vac, *0Hz / *0Hz
Power Input ...............=**0VA Refer to IEC******1, this equipment belongs to Class, Type BF.  Its operation is continuous.

ALARM

Power Alarm
Power Failure.......Activates if primary power to the Incubator fails or the power wire is accidentally disconnected from the wall receptacle.
Fan Alarm
Fan Failure..........Activates if Fan motor malfunctions. Sensor Alarm
Air Sensor Failure.........Air Sensor malfunction, refer unit to service. Deviation Alarm
High Air Temperature........Activated if displayed Air Temperature is 1.5 above set point
Low Air Temperature..........Activated if displayed Air Temperature is 2.5 below set point. Over Temperature Alarm
Over Air Temperature..........Activated when displayed Air Temperature was approach *8 in Air Mode.

TEMPERATURE CONTROL RANGE AND CORRELATIVE SPECIFICATIONS

Air Temperature.......*0 *7
Temperature Rise Time ....... =*0min
Temperature Variability........... ±0.5
Temperature Uniformity...........=1

ENVIRONMENT REQUIREMENT

Environment Temperature
Operation Temperature Range..........**0**0
Store Temperature Range............**0**5
Environment Humidity
Operation Humidity Range............*0u%
Store Humidity Range............**0%
Atmospheric Pressure Range...........**0hPa***0hPa

OTHER SPECIFICATION

Noise Level Within Hood Environment.......=*5dB(Environment noise below *5dB)
Carbon Dioxide (CO2) Level within the Hood.........Less than 0.5% when a mixture of CO2 in air is delivered at **0ml/min at a point *0cm above the center of the mattress.


Kindly contact us for more details .