Description
RM***0 Rubber Mastic (RM) Tape is a self-bonding mastic tape which
consists of an ethylene propylene rubber (EPR) backing, bonded to a
tacky, temperature stable, electrical grade mastic.
1. Excellent electrical properties2. Superior adhesion3. UV
resistant
Moisture, corrosion, and chemical resistant4. Suitable for direct
burial
RECOMMENDED USES: For insulating and moisture sealing of splices
and terminations on solid dielectric cable and telcommucation wire.
RM Tape can be wrapped, stretched, or molded around irregular
shapes for insulation build-up, water sealing and surface
protection.
L***0 Linerless EPR High Voltage Tape is an ethylene propylene
rubber based high voltage tape possessing excellent electrical,
chemical and physical properties. L***0 is a linerless,
self-bonding tape that permits much quicker taping speeds than a
tape with a liner and yields a uniform, void-free build-up. The
excellent stretch of L***0 allows conforma- bility to the most
complex shape and contour. L***0 Plyvolt is compatible with all
extruded dielectric cable insulations.
INSULATING AND JACKETING TAPE FOR USE THRU *9KV
Linerless Self-bonding
Outstanding corona, ozone resistance and UV Resistant
Excellent moisture, corrosion and chemical resistance
RECOMMENDED USES: For insulating and jacketing of splices on power
cable from **0 volts through *9, **0 volts and for building stress
cones and jacketing of terminations on power cable from **0 volts
through *5, **0 volts. Insulate and protect bus bars and
joints.
HX-B**0 Medium Voltage Tape is a butylene based medium voltage tape
possessing excellent electrical, chemical and physical properties.
It is a self-amalgamating tape that maintains a tight insulation
build-up for void-free electrical stability and permanent
resistance to moisture penetration. The excellent stretch of
HX-B**0 tape permits fast taping speeds and uniform build-up with
normal taping techniques. HX-B**0 is compatible with all extruded
dielectric cable insulations.
INSULATING AND JACKETING TAPE FOR USE THRU *6kV
-Self-amalgamating
-Outstanding Corona and ozone resistance
-UV resistant
-Excellent moisture, corrosion and chemical resistance
HX-W**3 high voltage tape is an ethylene propylene rubber based
high voltage tape possessing excellent electrical, chemical, and
physical properties. HX-W**3 is a self-amalgamating tape that
maintains a tight insulation build-up for void free electrical
stability and permanent resistance to moisture penetration. The
excellent stretch of HX-W**3 permits fast taping speeds and uniform
build-up with normal taping techniques. HX-W**3 is compatible with
all extruded dielectric cable insulations.
INSULATING AND JACKETING TAPE FOR USE THRU *9KV
Self-amalgamating
Outstanding corona and ozone resistance
UV Resistant
Excellent moisture, corrosion and
Chemical resistance
RECOMMENDED USES: Primary electrical insulation for splicing cable
from **0V to *9kV on all solid dielectric cables; Primary
insulation for building stress cones on cables up to *5kV on all
solid dielectric cables; Jacketing on high-voltage splices and
terminations; Moisture sealing electrical connections; Bus bar
insulations; End sealing high-voltage cables.
HX***0 low voltage tape is a self amalgamating, low voltage rubber
tape which meets the requirements of ASTM-D****8, Type I. It easily
conforms to irregular shapes and surfaces yielding a void free,
electrically stable build-up. HX***0 Rubber Tape is compatible with
all extruded dielectric cable insulations.
GENERAL PURPOSE INSULATING TAPE FOR USE THRU 2KV
Self-amalgamating
Good electrical properties
Effective moisture seal
Good conformability
RECOMMENDED USES: For insulating of splices on solid dielectric
cable thru 2KV in conjunction with a jacketing tape.
