Bicycle Pedal

Description

Bicycle Pedal

Color: red, green, blue, black, etc.

Material: Half Aluminum (middle black part is nylon material)

Perfect design classic style side with flash film strip to ensure cycling safety.

Light weight, non-slip tread design light up, for all types of bikes

[Installation]
 
1, the first foot or so feet, face, or the threads in the foot with CR-L/CR-R logo, L namely (left) foot, R is (right) foot.
2, please point the threads in the foot a little advanced butter, crank design for dental plate gasket groove, such as M**0 **0 **0 integrated crankset, foot pedals and cranks Circlip between the pads, gaskets relatively smooth side facing out (otherwise the pedal and crank threads are in use, there is a large degree of wear, easy to issuing subsequent abnormal sound!!)
3, with a *5mm open end wrench, tighten the pedal, note: the foot is the anti-thread (counterclockwise tight), the right foot is a positive thread (clockwise tight) (Angle of mountain bike upright, human-oriented crank), please try to use a long-handled pedal wrench and tighten with your greatest effort to tighten it stops, otherwise the pedal will be used in subsequent abnormal noise! !
4, the case of a circular pedal shaft (not open-end wrench), the pedal crank shaft into the dental plate, the other side of the crank use 6mm hex wrench to tighten.