MODEL helicopter WASP NANO CPX 3D Brushless from SKYARTEC RC

Notices:                     

 1. All signal wire connectors must be connected correct as required, otherwise will result failure of receiving remote signal, even receiver burnt and so on serious consequences.
 2.To avoid the knob broken, it needs to use the special configured adjust pen when adjusting all knobs.  
 3.When code-pairing, helicopter must be satic placed horizontal position.                             
 4. When boot should follow the principle of “turn on the transmitter first then power on the plane”. After turn on the transmitter, power on the plane within *0 seconds, receiver’s indicator light start flashing slow about 1~3 seconds, which means it is receiving the signal.If the light not on, it means receiving no signal, code-pairing is needed. Indicator light flash fast after receiving signal, which means the gyro is initializing. If the red light turn to constant light, and sound the mechanical voice of servo reset, which means the receiver start to work.
Thank you for purchasing SKYARTEC WASP NANO CPX Brushless helicopter which is considered high-perfermance,easycontrol,stable,durable and light weight. WASP NANO CPX adoptswith *-axis gyro system,incredible real-time responding in any 3D stunt flying. Furthermore,it offers goodstability and agility with configurating LCD 2.4GHz 7CH radio control , adopt *********0KV Brushless high-powered motor and *2A Brushless Esc .
This is Lori from Skyartec. Welcome toys reseller to chat with me on becoming our dearlers. you can touch me at lori (at)skyartec dot com