Product
feature This safe box uses a stationary type of
connecting way. That is, by fastening the screw bolt to the frame
of vehicles, to effectively protect the on-board valuables and
reach the aim of anti-theft or anti-pricing, being firm and secure.
With ingenious design and easy installation, we make good use of
the space of the body shell. The safe box is placed between the
spare wheel and wheel hub so as to fasten all three together. It
not only guarantees the security of the property, but also helps to
preventing from spare wheel thefts. Besides, electronic coded lock,
key lock and spare lock insure the safety of the belongings of the
owners.
1.
Usage Step one, dismantle the spare tire and
fix the screw by rotating it
anticlockwise, Step two, enter the password and open the
box, Step three, put the safe box into the
spare tire with its external packing bag together for your choice,
then fasten them with an aim of screws, Step four, lock the safe box and put down
the packing plate of the trunk to finish
installation.
2. Operation
instruction A. For the first operating, put 4 AA
batteries into the spare cell box connected to the external power
supply; B. Insert the key into the safe box and
input the initial password”**9” into the password
keyboard; C.
Press down the“#”and
turn the key to the right in order to open the safe
boxï¼› D. Take out the battery and put it into
the built-in battery jar at the bottom of the box, then press down
the “#” on the operating keypad to confirm
it.
â—Long
press any key up to *0 seconds or more without subsequent
input，it
will goes into sleep. â—Once
the safety deposit box turns into sleep mode, all the internal
operation will be terminated, unless you press down any key to wake
it up. â—The
private initial password was“**9”when
it rolled out of the manufacturing plant .Both administrative
password and private password can be altered at liberty
without the electricity on. They are all independent of each
other without one impacting the other.
3. Settings and alteration of
administrative password To start with, press“*0”and then the red
button behind the box door. After the buzzer chirps three times,
the yellow indicator lamp will be bright, which means it’s time to
set the administrative password. Next input 1 to *-digit code and
press the “#” to confirm. Along with the buzzer chirping twice, the
yellow indicator lamp will go out and the administrative password
setting or change is successful.
4.
Settings and alterations of the private
password
To
start with, press the red button behind the box
door.
After the buzzer chirps twice, the
yellow indicator lamp will be bright, which means it’s time to set
or alter the private password.
Next
input 1 to *-digit code and press the “#” to
confirm.
Along with the buzzer chirping
twice, the yellow indicator lamp will go out and the private
password setting or change is successful.
5. Opening and
locking
Input the accurate administrative
password or private password and press down “#”to confirm. Along
with the buzzer chirping twice, the green indicator light will be
bright to mean that the passwords input are right. After the
electromagnet sucking & shutting for 5seconds, opening or
locking can be operated.
After about 5
seconds，the
green indicator lamp will goes out and the electromagnet will be
released.
If
the passwords input are wrong, press down the “#”to confirm it and
the buzzer will chirp.
If
the input is wrong three times without exception, the operating
keypad will be deadly locked and can not be automatically released
for **0 seconds.
6. Indication for voltage
shortage
When
the voltage is short, the red indicator light will be bright.
Although the safe box can continue to work for a while, please
replace the battery as soon as possible.
This
type of safe contains a memory chip, which will store the password
forever even when the electricity is cut
off
