FOB Price
Get Latest Price|
Minimum Order
Place of Origin:
-
Price for Minimum Order:
-
Minimum Order Quantity:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
連絡先担当者 Rebekah
Dalang street, Shenzhen, Guangdong
| Strong silicone bra adhesive | |||||||
| Model No.: KL****4A/B | |||||||
| Method of application: | |||||||
|
• Surface treatment:The
base material though chemical treatment with the solvent , cleanup
greasy and dirt. • Coating: After mixing AB two-component evenly, use the way of brushing or dipping, spraying or screen printing. • Drying condition:Baking at *0°C for *0 minutes • Storage:Bonding sooner after coating,1 day is the best, and maximum 3 days if storaged at a no pollution and no high temperature humidity air place. • Vulcanizing:Unvulcanized silica gel though pressuring die casting with base material in high temperature or vulcanizing bonding under hot air. |
|||||||
| Tips: | |||||||
| • Store in dry shade about *5 degrees Celsius, and far away from heat and frame. | |||||||
| • Solvent is volatile, please cover the container tightly when it is done. | |||||||
| • The workplace should be ventilated and avoided fire. | |||||||
| >>> Typical Properties Data |
| Model No. | Feature | Ratio |
Hard-ness (°A) |
Rotating Viscosity (mpa.s) |
Solidity |
Curing Condition (tc*0) |
Curing Condition (tc*0) |
Tensile strength MPa |
Elong-ation % |
Tear strength KN/M |
Peeling ratio at *0° | Transm-ittance | Refra-ctive index | Application |
| KL****0AB | Silicone glue for PET | 1:1 | 3.5 | ****0 | *5% |
*9S* **0°C |
*2S* **0°C |
1.*1 | **9 | 2.4 | *0±1 | *2% | 1.*1 | self-adhesion, no need primer coating |
| KL****6AB | Silicone adhesive for PET | 1:1 | *5 | ****0 | *5% |
*9S* **0°C |
*2S* **0°C |
2.*5 | **0 | 2.*7 | *0±1 | *2% | 1.*1 | High transparent and self-adhesion, no need primer coating |
| KL****0AB | Silicone adhesive for PET | *0:1 | *5 | ****0 | *5% |
*9S* **0°C |
*2S* **0°C |
1.*1 | **9 | 2.4 | *0±1 | *2% | 1.*1 | High transparent and self-adhesion, no need primer coating |
| KL****6AB | Silicone adhesive for PET | *0:*1 | *5 | ****0 | *5% |
*9S* **0°C |
*2S* **0°C |
2.*5 |
