Description
Foam lunch box production
line
The PS food container machine mainly
including three main parts:
1. PS foam sheet extruder: make PS
foam sheet from raw material
2. Fully auto forming and cutting
machine: make PS sheet to finished products, such as PS foam tray,
PS foam box etc (we can design mould according to customer
requirements)
3. Plastic recycle machine: recycle
waste products to granules, the can mix with new material and put
into PS foam sheet extruder again
�
We�specialize in
making plastic machines for *0 years with advanced technology and
have accumulated vast experience. Our machines are sold well in
many countries such as England, Brazil, Portugal, India, Russia,
Uzbekistan, Iran, Indonesia, Cambodia�and so on. Sincerely hope
to�have chance to cooperate with you in near
future.
A. PS Foam Sheet
Extruder
Main technical parameters
| � Model |
Unit |
PSP*0/*0 |
PSP*0/**0 |
PSP**0/**0 |
PSP**0/**0 |
| � Extruder |
� |
*0/*0 |
*0/**0 |
**0/**0 |
**0/**0 |
| � Foam rate |
� |
****0 |
****0 |
****0 |
****0 |
| � Width of product |
mm |
*******0 |
*******0 |
*******0 |
*******0 |
| � Cutting method |
� |
Single cutter |
Double cutter |
| � Thickness of product |
mm |
1.**3.0 |
1.**3.5 |
1.**3.5 |
2.**5.0 |
| � Cooling method |
� |
Cooled by wind and water |
| � Output |
kg/h |
****0 |
******0 |
******0 |
******0 |
| � Installed power |
kw |
**0 |
**0 |
**0 |
**0 |
| � Dimensions(L�W�H) |
m |
*6�4.0�2.8 |
*0�4.1�2.8 |
*6�4.2�3 |
*8�4.2�3.2 |
| � Total weight |
T |
*0 |
*2 |
*5 |
*8 |
PS Foam Sheet Extruder uses a tandem screw technology to produce
fine-block cell-structured extruded polystyrene foam sheet with
high strength and a pearl and even surface, in a continuous roll,
from polystyrene injection an eco-friendly blowing gas and
additives. It has a user friendly operating system with inverter
controlled driving, digital temperature control and so on.
�
B. Fully auto forming and
cutting machine
| �Model |
Unit |
DY****0 |
| � Max. forming area |
mm2 |
***0�***0 |
| � Max. forming depth |
mm |
*0 |
| � Production efficiency |
s/die |
3 - 8 |
| � Forming pressure |
T |
*5 |
| � Mounted power |
kw |
**8 |
| � Total weight |
T |
*6 |
| � Installation size |
m |
*3�2�3.2 |
�
�
�
�
�
�
�
�
�
�
Fully automatic forming and cutting machine integrates forming,
cutting and stacking (trimming) at the same time. It has the
features of saving labor, improving efficient, lowing labor
intensity and reducing production cost. It adopts PLC controller
and touch screen to control the working program. Two workers are
enough for whole production line.
The machine is plastic sheet forming equipment in one step with
following process: transporting sheet, heating, forming, cutting,
stacking and winding waste edge.
��
C.Plastic recycle
machine
Plastic recycle and pelletizing machine is designed to reclaim the
foamed polystyrene materials almost identically to new ones with
its own superior filtering performance.
Structure
*- Extrusion unit
*- T-die with screen changer
*- Cooling water bath unit
*- Pelletizing unit
*- Control panel unit
�Main technical parameters
�
| Model |
Unit |
DY***0***0/**0 |
| � Screw diameter |
mm |
**0***0/**0 |
| � Motor |
kw |
*0 |
| � Heater |
kw |
*5 |
| � Extruder capacity |
kg/h |
*****0 |
| � Cooling water tank |
mm |
***0�**0�**5 |
| � Granule cutting motor |
kw |
2.2 |
�
contactor: jessica lv
phone ***************6
Skype: jessicalv2
QQ:*********9
ICQ:********0
trademanager Member ID: cn*********8
