Description

Remote Differential pressure / pressure transmitter is used to prevent the pipeline in the medium directly into the transmitter pressure sensor component, it is between the transmitter fill fluid by capillary connected. Used to measure liquid, gas or steam level, flow and pressure, and then into 4 ~ *0mA DC signal output。
JG***1/***1DP/GPPressure/Bring the remote seal pressure transmitter, you become a JG***1/***1DP/GPRemote pressure/Pressure transmitter, it still has a JG***1/***1DP/GPPressure/Various characteristics of the pressure transmitter. WithHARTThe terminal communicate with each other through it to set, monitor。
Avoiding the measured medium and the transmitter isolation diaphragm direct contact, this measurement method is suitable for the following several cases：
1、The measured medium on the transmitter-sensitive components have corrosion
2、Need to isolate the transmitter measured medium heat
3、Measured medium in suspended solids or high viscosity media
4、Measured medium pressure pipe from the lead or lead crystal at the same time easy to cure
5、Replacement of the media should be strictly tested probe purification 
6、Measuring head must be kept sanitary, non-pollution. Use Object: corrosive or viscous liquid
Note: The vacuum should not be used where remote transmitter。
JG***1/***1DP/GPRemote pressure/Pressure transmitter four types of remote devices： 
1、***1PFWFlat remote device (standard3″、Work stress2.5MPa）
2、***1RTWScrew-mount type remote device (maximum working pressure*0MPa）
3、***1RFWFlange mounted remote device
4、***1EFWType of remote device into the drum (standard3″Or4″，Work stress2.5MPa）