Description

Installation UVR for vacuum regeneration (refinement) of operating oils and fuels by PC GLOBECORE.

Installation is designed for cleaning and clarification of dark heating oil and dark diesel fuel also can be use for regeneration of light mineral oils, transformer oil, turbine oil, industrial oil, hydraulic oil, insulation oil.

Productivity of installation can be always increased in **3 times, you only need to buy supplementary blocks which are produced at our plant.

Installation UVR is universal and can be use for all types of reclamation, regeneration, cleaning of oils and fuels without any reconfiguration.
 

Installation UVR***0/*6 is base model, general purpose industrial version by PC Globecore production

Overall dimensions

-length – ***0 mm

-width – ***0 mm

-height – ***0 mm

UVR***0/6 is intended for purification, clarification, removal of aromatics of dark heating oil and dark diesel oil, gas-condensate, also for regeneration of transformer oil, turbine oil, industrial oil and other light mineral oils. For different products this installation gives a different productive capacity.

For transformer oil: capacity is **0 LPH

For dark heating oil: capacity is ******0 l/h

For gas-condensate ( you better should utilize another model explosion proof version): capacity is ***0 kg/h

Fuel, oil cleaning unit UVR **0/*6 is fully automatic, you can also select manual mode. The equipment is in compliance with all relevant international standards. All accessories are from manufacturers such as «Festo», “Camozzi”, “IVR”, “Carlo Gavazzi” (Italy), “Bell Flow Systems”, “Influx” (UK), “RVT Process Equipment GmbH” (Germany) and others.

Results of reclamation of dark heating oil are perfect. Dark heating oil passes through the unit only once. There is no double run, and no aluminum silicate. Our sorbent can reclam bed heating oil to the “like new” condition, remove aromatics, remove unsaturated hydrocarbons, remove hydrogen sulfide and others additions.

After regeneration of transformer oil on Fuel, oil cleaning UVR **0/*6 unit we obtain oil superior to new oil. Parameters of regenerated oil such as acid number, tangent delta are better compared to new oil.

All units of a complex on production of the fuel cleaning system UVR are made from stainless steel in following executions: general purpose industrial, containerized and explosion-proof version.

We also can propose you to make a reclaiming test of yours example of oil to verify the possibility of clean it. If the oil is contaminated and not suitable for use, filtration can be recommended.

Maintaining your fuel in a pristine condition will also benefit your machine life by reducing wear of the components.

All machines are manufactured by us in the Ukraine using the highest quality European components.

Fuel, oil cleaning system UVR **0/*6 (in different execution):

• Clean diesel fuel and light mineral oils such as industrial oil, transformer oil, turbine oil, and also gas-condensate, kerosene etc.

• Remove acids, sulfur, mercaptan, aromatic, different additions

• Remove all types of water (free, emulsified & homogenised)

• Can be operated by only one operator

• Fully portable

• Saves on Fuel Costs

• Environmentally friendly

Reclaimed oil might be BETTER then what you are using now

You don`t need to spend your money for buy a new oil. All you need is only carry out regeneration (reclamation) of yours used oil.

You don`t need spend your money for utilization spent sorbent it can be reactivated in the same unit. Each of these factors will help to reduce your operating cost.