Description

~LDPE Low Density Polyethylene Introduction:

1. HS code: *******0
2. CAS: ********4
3. EINECS ********2
4. Mainly Grade: Ingection Grade / Blow molding Grade / Blow Film Grade
5. Appearance: Transparent Granule / pellets, Black ,Colored
6. Formula: [C2H4]n
7. Type: Virgin and recycled

Physical Properties Test Method  Nominal Value Unit 
Density  ISO***3 0.**1 g/cm3
Melt Mass-Flow Rate (MFR) ISO ***3  1.9 g/*0min
Hardness      
Shore Hardness(shore D) ISO**8 *5  
Mechanical Properties      
Tensile Modulus  ISO****2 **5 Mpa
Tensile Strength  Yield  ISO****2 9.0 MPa 
Break *3.0
Tensile Strain(Break) ISO****2 **0 %
Modulus of Elasticity Internal Method  **0 Mpa
Thermal       
Vicat Softening Temperature(DSC) ISO**6/A*0 *9.0 Centidegree
Melting Temperature(DSC) DIN ****5 **8 Centidegree
Peak Crystallization Temperature(DSC) DIN ****5 *7.0 Centidegree
Heat of Fusion DIN ****5 **0 J/g
Electrical       
Volume Resistivity ASTM D**7 8.5E**5 Ohm.cm
Dielectric Strength ASTM D**9 *0.0 KV/mm
Dielectric Constant(*0HZ) ASTM D**0 2.2 %
Dissipation Factor(*0HZ) ASTM D**0 0.****0