Function & features:

1.This equipmnt specialized in led bulbs (E27,B22,E14holders) and led tubes aging testing through different voltages(0-300V can be adjustable),fluctuated voltages,high temperature(up to 70-80 degree centigrade),on-off automatic switches function,high temperature and high voltage aging,roaming function and normal lighting function etc to observe whether the led lights with problems in short circuit ,blasting capacitance ,bad connection wires ,failure soldering inside and also aging the power driver inside .simulation the led lights daily use .Electricity control system adopt variable frequency speed regulation system ,easy to operation .

Motor :

2.Adopt Taiwan brand 1500W east Cropland motor, WPS80 type 1:6 0 of the Jiacheng reducer,famous brand 2HP frequecy converter,frequency conversio stepless speed regulation ,linear speed 2-6 m/min adjustable.

Conveying chain:

3.Adopt shanghai chain factory, an inch of double pitch single ear double hole chain.Each long 20 meters

Machine body & frame

4.Rack with 40 x 40 steel pipe welding is made and be become, skeleton fluctuation edge using special aging line aluminum alloy profiles,guard made by 1.5mm cold plate bending .leg match galvanized adjustable goblet .

Chain plate :

5.Using cold plate bending rolling into 148 x 1350 x 15 mm, all 140 pieces chain plates, of which 70 pieces

jacket 20 E27 screw-type holders sockets, In order to aging LED bulbs, and another 70 piece of chain plate

installation LED light tube clamp head foraging LED tube lights, (only for T8,T10 Tube Length range from 0.6m-1.2m) and equipped with high marks off miniaturecircuit breaker (made bysino-foreign joint venture foshan factory); Chain plate bottom installation acoustic conduction system (copper), each road install two conductive block, each plate were put two pieces of copper .

Daily output:

6.Onetimecan aging 1400 pieces of LED bulbs, 280 pieces ofLED light tubes, aging time

is about 1 hour, According to work 10 hours every day calculation, a day of production for

14000 pieces led bulbs,and 2800pieces of led tubes.

Stop light shield:

7.About Seven sections oflight shield blocks arrange at the both sides.made of brown plastic

plate and aluminum alloy combinations. Effective dampingstrong lighting reflection,

better protect your eyes.

Conductive tank:

Up and down with all the acoustic conduction channel rail, the insulating rubber sheet,

assembly stainless steel electric tank.

Constant temperature area:

8.Thermostatic systemuse electric heated tubes, a period of two pieces of 2000 w/set

of electric Conductive tank: Thermal heating plate, temperature automatic constant

Temperature from room temperature- 70 °C, digital temperature control instructions.

Detection time circuit:

9.As for a block beat control area. Impact area time by PLC microcomputer control.

Detection test roaming area:

10.Set any one for roaming area, make voltage with the change of time and fluctuation,

180-220-250 uninterrupted change, roaming area time by PLC microcomputer control

The voltage area:

11.A total of five voltage regulators ,each one 10kw, the effective voltage area altogether designs

seven area,3 pieces of voltage regulator 0-250 v adjustable, two voltage regulator 0-300 v .

Adjustable .(specific distribution can be required by party a and decide).

Touch screen:

12.The panel man- machine touch screen control, impact area, roaming area time according to your requirements .

Electric control:

13.Voltage, temperature control instructions using digital display type, the whole system

use PLC control, voltage regulator five, using a distribution control cabinet installed.

Beside the operation station with urgent stop switch, convenient to stop the machine in time.