FOB Price
Get Latest Price1 ~ 5000 / Set
|Minimum Order
Place of Origin:
China
Price for Minimum Order:
Minimum Order Quantity:
1 Set
Packaging Detail:
naked packing covered with plastic film
Delivery Time:
100 days
Supplying Ability:
5 Set per Month
Payment Type:
T/T, L/C
連絡先担当者 Melisa
No.158 Shengang Rd., Pudong New Area, Shanghai, Shanghai
| No | Item | Parameter | Note | |
| 1 | Suitable Material | Type | Pre-painted/ Galvanized/ Carbon/Aluminium/Stainless steel coil | According to customers' requirements |
| Width(mm) | *******0 | According to customers' requirements | ||
| Thickness(mm) | 0.**3.0 | According to customers' requirements | ||
| Yield stress | **5Mpa | According to customers' requirements | ||
| 2 | Product Specifications | Coil ID(mm) | **8 | According to customers' requirements |
| Coil OD(mm) | Less than ***0 | According to customers' requirements | ||
| Coil weight | *5,**0kg | According to customers' requirements | ||
| Min strip width | *0mm | According to customers' requirements | ||
| Width precision(mm) | 0.*5 | Thickness: less than 1 | ||
| 0.1 | Thickness: more than 1.5 | |||
| Straightness(mm) | 0.6/***0 | Raw coil quality: according to JIS | ||
| 3 | Human resource | Quatity | **5 persons | Â |
| 4 | Cutting System | Diameter of cutter shaft(mm) | **0 | Depend on actual design |
| Cutter material | 9CrW2Si | Depend on actual design | ||
| Cutter type | Dia**0 X Dia**0 X *5 | Depend on actual design | ||
| Cutter hardness | HRC****0 | Depend on actual design | ||
| 5 | Power Requirement | Type | **0V/3Ph/*0HZ | According to customers' requirements |
| Total Power(Kw) | **0 | Depend on actual design | ||
| Pressure of pressed air(Mpa) | 0.**0.6 | Â | ||
| Air demand(L/min) | ***0 | Â | ||
| 6 | Working Speed(m/min) | *0/**0/**0/**0/**0 | According to customers' requirements | |
| 7 | Installation Dimension(m) | *0.0X9.0 | Depend on actual design | |
| 8 | Total Weight(T) | *0 | Depend on actual design | |
|
ATTENTION: Most of our slitting machines are customized according to the customers' detail requirements. |
||||
