ST-7603C Cable Flame Retardant Tester

Description

ST****3CA Single Cable Vertical Flame Retardant Tester 
**(including Fume-hood + Exhaust system + Auto-moving system for burner)
Standards: According to GB/T ****0.******8, IEC********1: ***5, GB/T ****0.******8, IEC********2: ***5, GB/T ****0.******8, IEC********3, EN******1, EN********1, GB/T***9.******7 and IEC*********2, EN ********2, DIN EN ********2 & VDE***********2, and IS****0 Part *1
Range: Applies to check the single insulation wire and cable vertical spreading test which total section area more than 0.5mm²
Technical parameters:

1. Fume hood size: W***0 * D***0 * H***0mm
2. Chamber made of Steel with spray.
3. Metal  enclosure: W**0 * D**0 * H***0mm
4. Gas: Use *5% over purity propane gas or liquefied petroleum gas (provide by user)
5. Length of specimen: **0±*5mm;
6. Area of specimen: The section area more than 0.5mm²
7. Testing environment: no-ventilated and test temperature is *3±*0°C;
8. Flaming time: Continuously setting between 0.****9.9S
9. Ignition method: Auto-ignition system
10. Gas flux range: 0.**1L/min (**0~***0cm³/min), can be adjusted;
11. Air flux range: 0.**1m³/h (1.*6~*6.6dm³/min), can be adjusted
12. Test Pressure is 0.1Mpa (1bar)
13. Burner: 1kW, after test, apply flame and move away automatically in time, not via by hand to effect the test result.

1. Power supply: **0V±*0%, *0Hz, 2A
2. Accessories including as below device