Description
1. Interface
RJ**5 interface
The transmission media adopts CAT5 twisted-pair with typical length
of **0 meter. It features the function of automatically identifying
the through line and cross wire (*0/**0M).
Fiber interface
The two Gigabit ports can be ***0Base-SX/LX through SFP (Small Form
Factor Pluggable) interfaces. The distance can be extended from **0
meters (Multi-mode fiber), up to above *0/*0/*0/*0/*0/*0/**0
kilometers (Single-mode fiber).
2. Connection
The network device (work station, hub or switch) with RJ**5
interface is connected to RJ**5 jack of optical transceiver through
twisted-pair. And the multi/single mode fiber is connected to SC/ST
fiber interface of the optical transceiver. Then switch on. The
corresponding LED is on for correct connection. (See the table
below for the LED indicator lamp)
Main
features
1. In conformity to IEEE **2.3u **0 Base-T standard.
In conformity to IEEE **2.3ab ***0 Base-FX standard.
2. Back pressure flow control for full duplex IEEE**2.3 X and half
duplex.
3. Automatic identification of MDI/MDI-X cross line.
4. High-performance1.4Gbps memory bandwidth.
5. In conformity to safety code of FCC and *5 CLASS A and CE
MARK.
Support Vlan
(Port
isolate),QoS
,IPv4
,IPv6
Support max *0k byte Super-long
packet
DIP
switch:Left,enable
VLAN,Right,disable vlan。This
VLAN only
plays the RJ**5 ports isolation effect
FPacking list
Please check the following items in the package before installing
the transceiver.
Fast Ethernet optical transceiver
1set
AC/DC adapter
(external)
1pc
Power line
(built-in)
1pc
User manual
1copy
Warranty card
1pc
Please contact the dealer immediately for any loss or damage to the
above items.