Hss circular saw blade

Description

 

Specification: Diameter *****0mm, bore *5.***0mm, thickness 0.**5.0mm

Surface treatment: Original.VAPO, TIN and etc.

Tooth form: A, BW,C .etc.

Blade material:M2,M*5 and other special high speed steel.

Blade application: Are used on manual,semi-auto,full-auto sawing machines to cut different steel materials and alloys in tube or profiles.

Tooth form “A” and “AW”

For thin metal slitting saw blades with a tooth pitch up to approx 3.0mm

Advisable for brass,tooth form “A” is suitalbe for slotting materials.

All teeth of tooth form “AW” are bevelled alternatively.

 

Tooth form “B” and “BW”

 

Suitable for cutting tubes and profiles made of steel or non-ferrous metals.

Tooth form “B” is specialized for cutting very thin walled pipes and profiles.

All teeth of tooth form “BW” are bevelled alternatively.

 

Tooth form “C”

Teeth are ground accordingly to the roughing and finishing tooth system.

Tooth pair is consisting of one roughing tooth(1/3 cutting width) and one finishing tooth(2x1/3 cutting width).According to the triple chip geometry the roughing tooth is approx. 0.**0.3 mm higher compared with finishing tooth.This tooth is suitable for cutting solid materials.