Used Caterpillar 140H for sell

Description

Dimensions 
Overall Length *8.6 ft in ***3 mm 
Width Over Tires 8.1 ft in ***4 mm 
Height to Top of Cab *0.3 ft in ***1 mm 
Wheelbase *0.2 ft in ***9 mm 
Rear Ground Clearance 1.1 ft in **4 mm 
Front Ground Clearance 2 ft in **0 mm 
Tandem Axle Wheelbase 5 ft in ***3 mm 
Blade Base 8.4 ft in ***1 mm 
Specification
Engine 
Make Caterpillar 
Model ***6C DITA ATAAC VHP 
Net Power Gear **2 **5 hp **3 kw 
Net Power Gear **4 **5 hp **8 kw 
Power Measured  ***0 rpm 
Net Power Gear **6 **5 hp **8 kw 
Number of Cylinders 6 
Net Power Gears **8 **5 hp **8 kw 
Max Power **5 hp **8 kw 
Displacement **9 cu in *0.3 L 
Operational 
Std Operation Weight - Front Axle ***3 lb ***8 kg 
Std Operation Weight - Rear Axle ****4 lb ****9 kg 
Std Operation Weight - Total ****7 lb ****7 kg 
Max Operation Weight - Front Axle ****3 lb ***0 kg 
Max Operation Weight - Rear Axle ****9 lb ****1 kg 
Max Operation Weight - Total ****2 lb ****1 kg 
Fuel Capacity **5 gal **7 L 
Cooling System Fluid Capacity *0 gal *8 L 
Hydrauilc System Fluid Capacity *0.8 gal *0 L 
Rear Diff/Final Drive Fluid Capacity *2.4 gal *7 L 
Circle Gearbox Fluid Capacity 1.8 gal 7 L 
Tandem Case Fluid Capacity (each) *6.9 gal *4 L 
Transmission 
Type direct drive, power shift 
Number of Gears - Forward 8 
Number of Gears - Reverse 6 
Max Speed - Forward *7.4 mph *4 km/h 
Max Speed - Reverse *1.6 mph *4.7 km/h 
Steering 
Articulation L/R *0 degrees 
Turning Radius *4.6 ft in 7.5 m 
Front Axle 
Wheel Lean *8 degrees 
Oscillation - Total *2 degrees 
Ground Clearance 2 ft in **0 mm 
Hydraulic System 
Pump Type axial piston 
Pump Flow *4.4 gal/min **6 L/min 
Relief Valve Pressure ***0 psi ****0 kPa 
Moldboard 
Moldboard Width *2 ft in ***8 mm 
Moldboard Height *4 in **0 mm 
Moldboard Thickness 0.*7 in *2 mm 
Max Depth of Cut *8.1 in **5 mm 
Side Shift Left *0.6 in **4 mm 
Side Shift Right *6 in **0 mm 
Blade Pull at Max Weight ****4 lb ****5 kg 
Blade Down Pressure ****7.6 lb ****7 kg 
Circle 
Diameter *0.2 in ***0 mm 
Shift Left *7.4 in **5 mm 
Shift Right *8.7 in **8 mm 
Max Reach Outside Tires - Left *4.6 in ***6 mm 
Max Reach Outside Tires - Right *7.9 in ***8 mm 
Max Lift Above Ground *8.9 in **0 mm 
Blade Tip Angle - Front *0 degrees 
Blade Tip Angle - Rear 5 degrees