sealing system for circle cooler used in sinter plant

Description

Circular Cooler is using air-blast way for cooling sinter in sintering plant, generally the sinter temperature is ******0℃ when it enter into cooler at the first beginning, the Grate Wing Pallet Cars will run the Circular Cooler a round. After completion of the sinter cool down, the temperature will be dropped down to **0℃ below usually. The cooling sinter will be discharged in the unloading zone of circular cooler.
 
In order to enhance the production efficiency and the sinter quality, reduce energy consumption, and put things right once and for all to completely solve the problem of air leakage, Qin Huang Dao Hongtai Machinery Company researched and developed a new kind of sealing system named “Circle cooler inclusive type mechanical sealing system ”. It is a patent production and easy to maintain.
 
The features:

1. Energy-saving and consumption reducing: Inclusive type mechanical sealing system completely solve the problem of air leakage of circle cooler, air leakage rate at the place of dynamic and static rubber will be cut down over *0%，and cooling effect increase above *0%, effectively to avoid burnout of convey belt. Blower will not need to work with full load. Under the same cooling effect, total electric power of blower will save **0KW/H or above.
2. Productivity increasing: Because of cooling effect raised greatly, circle cooler can cool the sinter promptly which produced by sintering machine and convey it smoothly, thereby lessen influence on sintering machine with full load since previously the sintering cannot cool immediately on circle cooler.
3. Spot environment improving: Because of air leakage rate reducing greatly by adopting inclusive type mechanical sealing system, there will not be dusty scene appeared on site.
4. Waste heat recovery power generation increasing: Because of good sealing effect, air temperature increased obviously during the period of waste heat recovery in the circle cooler, and improved the productivity of waste heat recovery.
5. Labor intensity reducing: When the outage maintenance, it will decrease extraction around the track by labor clearing, no need to change the dynamic and static rubber sheet, thereby decrease the labor intensity of workers.