Vacuum brazed diamond saw blade(multi-purpose blade)

Description

Vacuum Brazing is a chemical metallurgy welding technique, bonding metals and metals, metals and non-metals, non-metals and non-metals through hot soldering. In vacuum brazing, welding solder combines parent metals together at a welding temperature lower than parent metals melting temperature, i.e. vacuum brazing compounds parent metals together through solders or liquid with parent metals not melted. 

Technical Superiority:

1、 Much Higher Particle Bonding Strength, vacuum brazed tools enjoys high particle bonding, which ****0% of its solder compound (generated chemically through hot soldering) would be enough to hold diamond particle firmly for heavy-duty and high-efficient cutting;

2、Higher Cutting Power with ****0% of diamond particle height exposed, which keeps blade high cutting sharpness, decreased diamond consumption and lower heat generation;

3、Better material escape, high diamond particle exposure enables material escape easier, keep diamond sharp and not dull segment happened. 

4、Higher Diamond Utility Ratio, despite of few fall-off diamond, at least ****0% of diamond particle inside are well utilized in cutting which extends tool life.

5、Efficient cutting for all materials, such as: granite, concrete, reinforced steel bar, ceramic, glass, wood and plastic etc.

6、High cutting speed blades at risk-free ******0m/s. up to ***0m/s RPM for its refine compound strength;

7、Environmental Friendly Blade. Compared to electroplating, vacuum brazing production greatly reduces pollutant generation which meets industrial production standards;

8、Possibility of Mass Production for its advanced manufacturing craft, production equipment and raw material feasibility.

Application:

1、Home Use, multi-purpose blades, cutting all materials, esp suitable for European and Americans families;

2、Emergency Rescue - High Diamond Bonding Strength, Good Diamond Exposure enables its powerful cutting and fast cutting on Emergency Rescue and Fire Fighting;

3、Good Material Escape, suitable for cutting easily-jam materials like resin windmill blades and other non-ferrous metals;

4、Efficiency cutting on high density reinforced concrete, cast iron pipes and Reinforced Steel Bar on Railway Tracks

5、Excellent Performance on Super Hard Granites, Ceramic and other hard materials that electroplated blade or sintered blade does not cuts