Description

SPS rapid pressure sintering system is one of worlds most advanced hot pressing sintering systems. It has characteristics of fast sintering, high density, and is the good tool for sintering nanometer-phase materials, rare earth permanent magnetic materials, glass, non-equilibrium alloy materials and biological materials.
 
1. Applied range of SPS sintering materials
 
Metal:Fe, Cu, Al, Au, Ag, Ni, Cr, Mo, Sn, Ti, W, Be, etc.
Ceramics Oxyde: Al2O3, Mulite, ZrO2, MgO, SiO2, TiO2, HfO2
Carbide: SiC,B4C, TaC, WC, ZrC, VC
Nitride: Si3N4, TaN, TiN, AlN, ZrN, VN
Boride: TiB2, HfB2, LaB6, ZrB2, VB2
Fluoride: LiF, CaF2, MgF2
Cermet: Si3N4+Ni, Al2O3+Ni, ZrO2+Ni, Al2O3+Ti, SUS+WC/Co, BN+Fe, WC+Co+Fe
Intermetallic Compound: TiAl, MoSi2, Si3Zr5, NiAl, NbCo, NbAl, LaBaCuSO4, Sm2Co*7
And other Organic Material, Composite Material.
 
 
2. Functions

• working temperature up to ***0°C
• vacuum: 5×*0*3mbar
• furnace gas: Ar / N2 (and others, on request)
• servo hydraulic force control
• precise, rigid frame with low deformation, accurate guiding of the pressing dies
• measuring of densificatio path
• double-walled water-cooled stainless steel vacuum vessel with a leak rate of up to 1×*0*3 mbar l/s
• easy accessibility
• temperature measurement and control can be chosen between axial/radial pyrometer or flexibl thermocouples
• freely programmable sintering parameters for up to *0 segments per recipe
• freely programmamable pulse on/off (1...**5 ms) for each segment individually
• heating rate up to ***0 K/min
• extensive software for data recording and evaluation of all sintering parameters
• user friendly online process management system