FOB Price
Get Latest Price10 ~ 60 / Kilogram ( Negotiable )
|Minimum Order
Place of Origin:
-
Price for Minimum Order:
Minimum Order Quantity:
500 Kilogram
Packaging Detail:
Pallet
Delivery Time:
10 to 30 days
Supplying Ability:
50000 Ton per Year
Payment Type:
T/T, L/C, Western Union
連絡先担当者 Leo
No.1818,SunTangBei,RD,Cixi, Ningbo, Zhejiang
As an advanced new material, the stainless steel clad plate fully
realizes the complementary advantages of materials which both show
decay resistance, abrasive resistance, diamagnetism and
decorativeness of composite material, and exhibit good weldability,
moldability, ductility and thermal conductivity of base material.
Application of this material can significantly improve strength,
rigidity and impact load strength, reduce weight of structural
members, decrease costs significantly while ensuring technical
requirements, and this material is a new generation energy
conservation and environmental protection product.
1. Executive standard of stainless steel clad plate: refer to
GB/T********8 Stainless Steel Clad Plate and Steel Strip
2. Product specification: thickness: 3mm≤ thickness ≤*0mm, wherein thickness of cladding layer 0.5mm～5mm, basic layer thickness ＞2.5mm, width 1,**0mm～2,**0 mm and length ＜*5,**0mm.
3. Product type: common base materials: Q**5A(B), Q**5A(B), *0g, *0R, *6MnR, etc.
Common cladding materials: 0Cr*3, 1Cr*3, 0Cr*7, 0Cr*8Ni9, 0Cr*8Ni*0Ti, 1Cr*8Ni9Ti,
4. Feature of stainless steel cladding plate:
(1) Binding rate: no less than *9%
(2) Mechanical property
| Interface shear strength Jb,Mpa≥ | Yield point σs, Mpa | Tensile strength σb, Mpa | Ductility δ, % | Impact toughness Akv, J |
| **0 | Not less than standard value of base layer steel plate | Not less than standard value of base layer steel plate and not greater than ceiling limit value *5Mpa | Not less than standard value of base layer steel plate | Should comply with requirements for base layer steel plate |
（3）Processing property
| Thickness, mm | Flexural center d | excurvation, incurvation, **0º |
| ≤*0 | 2a | No layering and crack |
Â
Note: a stands for total thickness of clad steel plate.
5. Delivery state: deliver after hot rolling, heat treatment or polishing.
6. Specific application scope: raw coal hopper of power plant, pressure vessel, storage tank, reactive tank, desulfuration equipment, anti-corrosion pipeline, water tank, etc.
7. Stainless steel clad plate specification, type and application
