Description

• Overview:
  • PS***1T Series PoE switch compliance with IEEE**2.3at standard, with power supply distance within **0meter, and support **2.3af/at terminal device. Therefore, there is no need to worry about damaging private standard PoE or non-PoE device. In addition, when the PoE is not connected, it will stop power supply. PoE switch supply power and transfer date by network cables, network cables do not require a qualified electrician to fit them, and can be located anywhere, so reducing the time and expense of having electrical power cabling installed. It is also very compact and flexible in design. PS***1T Series is the ideal choice for those who desire to economically use PoE to deploy wireless access point and small-size commercial network that is based on IP camera.
• Key features:
  • IEEE **2.3at Power over Ethernet PoE compliant
  • Supports *0/**0Mbps fast Ethernet
  • 8 x **0Mbps Auto-MDIX PoE port, 9th **0Mbps RJ*5 port uplink
  • Internal power supply
  • Provides up to *0watts for single PoE port
  • Automatically detects the PoE class level of a Powered Device
  • 1.8Gbps bandwidth
  • Forwarding rate: **0 Mbps/ **8,**0pps; *0 Mbps/ *4,**0pps
  • Status LEDs: System Power, PoE, **0 Mbps, and Link/ Activity
  • Full wire-speed non-blocking reception and transmission
  • Store-and-forward switching method
  • Back pressure Flow Control for Half-Duplex mode
  • IEEE **2.3x Flow Control for Full-Duplex mode
• Specifications:
  • Network port: *0/**0Mbps POE port (8 ports)
  • *0/**0Mbps Uplink (the 9th)
  • Speed: **0M/***0Mbps full duplex
  • Internet port: **0BASE-T or ***0BASE-TX POE RJ**5 port