pipe coating materials PE Black wrapping tape

Description

Quick Details

• Other Names: polyethylene corrosion protection tape
• Place of Origin: Shandong, China (Mainland)
• Classification: Other Adhesives
• Main Raw Material: PE,butyl rubber
• Usage: Transportation, Corrosion protection for Oil/gas pipeline
• Brand Name: XUNDA
• Model Number: XUNDAT100
• Other Names: anticorrosion tape
• Place of Origin: Shandong, China (Mainland)
• Usage: Construction, Transportation, Other
• Materials: polyethylene
• Adhesive: Butyl rubber
• Color: balck
• usage: pipe anticorrosion
• layer: 2
• same brand: polyken,Denso
• thickness: 20 mil 25mil Specifications
   
  pipe coating materials PE Black wrapping tape
  1:factory
  2:AWWA,DVGW,SGS,ISO
  3:Thickness0.3-1.6mm
  4:Width:25-800mm
   
   

  pipe coating materials PE Black wrapping tape

  pipe coating materials PE Black wrapping tapeis with a

  stabilized polyethylene carrier film, coated on one sides with a permanently

  plastic synthetic compound on a butyl rubber base. The highly stable

  and supple carrier film guarantees a high degree of

  protection from mechanical damage.

   Features

   Excellent adhesion to a wide range of substrates found,

  including concrete and steel piping.

   Compatible with common pipe coatings.

   Endures extremes of heat and cold.

   Excellent resistance to cathodic disbondment.

   High water and vapour impermeability.

   

  Usesing

   Provides long-term corrosion protection to steel pipelines.

   

  Repair of damaged factory applied corrosion protection.

   

  Outlining weld beads and cut backs prior to wrapping bare-welded joints.

   

  Outlining seams on spiral and seam welded pipe.

   

  Primer-less mastic tape readily conformable to odd-shaped pipe

  fittings, valves, flanges and other buried structures.
  Application

   Prepare surfaces by eradicating all loose scale, rust or other foreign matter

  by grit blasting or wire brush. The surface must be clean, dry and free of grease.

   Peel back strip and apply tacky side of the tape to the surface and apply pressure.

   Apply the tape spirally with sufficient tension to make it conform.

  Remove interleaving as wrapping proceeds. Overlap each turn by at least 1 or 55%.

  (Note: when proper surface prep is not achievable or when applying to pitted pipe,

  apply a thin film of Butyl Pipe Primer to all surfaces to be wrapped and allow to dry).

  (Over width silicone paper prevents product contamination during site handling and storage). 
  
  Want to know more details, please contact us:
  Contact :Nancy Song
  Skype:nancysong7
  TEL:+86 * *-*:*@********************>