PP Bag Pelletizing Line

Description

Specifications

The process flow of PP Woven film pelletizing line is as following:

Film elevated system →PP Woven film compactor→ Extruding system→High speed Net exchanging system→Extruding system→ High speed Net exchanging system→ water ring pelletizing machine →water trough dewatering machinevibrating sieve air blower system → Storage tank

the reference  paremeter for  output  ******0 /hour

B.1 Elevated conveyor                                 1 set

1. Effective conveying part: ***0mm;

2. Motor power: 2.2 KW,  frequency control

3. Conveying belt width: ***0mm

4. Adjustable elevated height

B.2 PP bag compactor                              1 set

1. Motor: *5 kw

2. Rotating Knives: 6pc

3. Fixed Knives:6pc

4. Material of Knife: Gr*2MoV

5. There is a temperature sensor point inside the machine.

6. The inside material is stainless steel

7. This machine with cooling device , the motor of cooling fan:3 kw

8. Motor is AC motor

9. The compressing system with one glass window

*0. The compressing system with oil cylinder system which is used to open the cover on the top

B.3 Single screw extruder                               1 set

1. Screw Diameter: φ**0mm

2. Motor Power: **0 KW, DC Motor

3. L/D: *0 :1

4. Material of screw : *8CrMoAl, nitriding treatment

5. Heating power : *8kw

6. Cooling power: 2.*6kw

7. Vacuum venting system : 2 section

8. Power of vacuum pump: 4 kw

9. Gear box : special hard gear reducer 

*0. Way of Lubrication: oiled

*1. Way of cooling : by wind ,the section of material feeding cooling by water

*2. Transmission system adopts Germans technology. Three bearings horizontal design, SKF bearing, oiled lubrication,imported seal. The machine of transmission system adopts spring pin for overload protection and overflow protection, and the electric elements adopt overflow protection