slag-free tapping from the
converter is required now. We have developed series of slag
stoppers for steel convertors such as ball type with cross furrow,
circular truncated cone type, polyhedral type, hemispheroid type,
with the guide rod type, etc.. It can also be designed into conical
composite wall type to further improve the blocking slag effect. A
kind of high damping slag stopper is developed recently. There is
no burst when used with high strength. The hit rate of the blocking
slag and the slag rate all exceed *5% and the blocking slag effect
is good. The slag thickness in the steel ladle is less than *0 mm (
There are obvious signs of charge flow when molten steel is
discharged completely.)
3.Charactristics
. Low thermal
conductivity
. Low thermal storage
. Excellent thermal shock
resistance
. Excellent compressive
strength and rupture strength
. Excellent resistance to
wind-erosion,wera and impact
. Well-adapted to furnace
atmosphere
4.Typical Application
. Industrial furnace wall
lining or high-temperature industrial furnace back-up insulation.
Integral casting of ladle baking cover; heat pipe wall lining
. General and abnormal
shaped pre-forms such as continuous heating furnace, vertical pit
furnace, lifting furnace, furnace door, kiln eye and burner
brick
. Teeming ladle lip, channel
and tank of non-ferrous metal, ferrous metal
If you have any questions or you cannot find the product you want,
please do not hestiate to contact us, we will try our best to
satisfy your requirements.
April
Company: Zibo Gaulle Refractory Material Co.,Ltd.(Manufacturer)
E-mail: