Automatic production
line process: 1. Mix materials,
extrude the film bubble in the screw extruder system, then
flattening the film bubble
2.1st haul-off unit
3.Italy Syncro film thickness measurement system and Jinming
automatic die lip system (test and control the thickness of the
film) 4. Reversing haul-off
Unit
5. Web guider
6. 2nd haul-off unit
7. Guide roller 8. WSD-III automatic
double-station back-to-back winder
9. Tower(frame of all machines)
10.Electrical Control System
(control all the machines)
11.Package
 General
Specification 1. Max. layflat film
width: 1025mm 2. Film thickness:
0.06~0.25mm (when thickness over 0.2, film width should be
reduced)Â 3. Film Thickness
tolerance: ≤±10% (measure by micrometer at 50mm per point, at 2
sigma)Â 4. Seven-layer
co-extruded structure: A/B/C/D/E/F/GÂ 5. Max. winding
diameter: Φ800mm 6. Max. Mechanical
speed: 45m/min 7. For the processing
of: PE, PA, Tie Raw material:
PA/TIE/PA/TIE/PE/PE/PEÂ Interlamination ratio:
15:10:15:10:15:15:20 8. Max. output
capacity: 166kg/HÂ 9. Machine outer
dimension: approx.17,000 x 8,600 x
10,500mm 10.Total power:
approx. 350KWÂ 11. Voltage: 3-phase,
AC 380V, 50Hz 12. Machine weight:
approx. 50 tonsÂ
