Description
The flexible pipes or hose are lining with ceramics balls are used
to reduce the internal costs.However,the TMP developed the ceramic
tile in the form of
pressure wich has five times longer useful life.Another adavantage
with respect to flexibility,wich my curve in the same
proportion.
In the newly developed ceramic hose, ceramic tips are used to
eliminate a disadvantage in a conventional ceramic hoses. It has
higher abrasion resistance
while maintaining flexibility. The standard producible ceramic hose
is limited to *0 m in length and *0 to **0 mm in hose diameter.
The TMP ceramic pipe has a characteristic in its new shape of a
ceramic tip for which we have applied for a patent. A conventional
ceramic tip was arranged with a certain gap between tips in a steel
pipe so that the pipe was damaged at the gap before the tip was
worn out. The newly developed ceramic tip has a shape with no
straight line portion parallel to the transport direction so that
the steel pipe is protected until the tip is worn out.
THe tailings that are in the pipeline hydraulic transport,wich are
the phenomena known as the wear abrasion,fatigue,impact.
Have seen that,the use of a tube is 6mm in lenght,the pipe wall
thickness was *0mm,and after 8 mounths of using,the bottom is
correded till the pipehas 1mm of thickness.
The pipe lined by TMP has the advantage of the 3mm to 4mm of
thickness after *2 mounth of use,
ten times more than life to the pipe.Guaranteed protection against
abrasion.
The direction of alignment of ceramics in zig zag,have excellent
resistance tc friction of abrasive agents such as
sand,gravel,gravel,tailings with solid particles,scale,coal,pulp,
tailings from phosphate,salt slag, sludge,ash,..
The zig zag ceramic alumina pressure has superior performance
against abrasion,wich has five times more resistant than the
conventional ceramic. If the objective is protection of components
and reduced maintenance costs,the correct application of
anti-abrasive lining led immediately to track the economy. If the
objective is protection of components and reduced maintenance
costs,the correct application of anti-abrasive lining led
imediately to track the economy.
The TMP ceramic pipe lining of hydraulic and pneumatic conveying
transport has efficiency and
economy,especially in steel tubes.Where they have great advantages,
increasing the time of life.
Due to its zigzag shape, the ceramic tip does not produce a groove
parallel to the transport direction so that the steel pipe is
protected until the tip is worn out.The press molded ceramic tip
has more than 4 times higher abrasion resistance than a cast-molded
ceramic tip; however, it is quite high in price. The TMP ceramic
pipe has been provided at a low price by performing all production
processes internally.
A liner can be installed over whole area in an elbow pipe. However,
it is quite effective just by installing the liner to approximately
*5% of internal surface of the steel pipe, especially around the
outer corner of high abrasion. The required lining area is
different depending on the transported object and rate.
