Polyethylene single side adhesive outer tape corrosion protection for pipes

Description

Polyethylene single side adhesive outer tape corrosion protection for pipes  (Protection Tape, Protective Tape,polyethylene tape) is for protectionof pipe and the surfaceof Inner Tape from damages.
Outer wrap tape Features:
1) The specification of the tape consists of two layers, adhesive and film
2) Inner layer: butyl rubber
3) Outer layer: polyethylene
4) Thickness: 0.40 - 1.30mm
5) Width: 50mm, 75mm, 100mm, 150mm, 230mm, 300mm
6) Length: 30 - 300m
(Protection Tape, Protective Tape,polyethylene tape) is for protection

of pipe and thesurface of Inner Tape from damages.
The specification of the tape consists of two layers, adhesive 

layer and film backing

 Adhesive: butyl rubber 

 Film backingr: Special blend of stabilized polyethylene

 System description:

  Polyethylene single side adhesive outer tape corrosion protection for pipes

XUNDAT200 series is Cold applied tape coating system for corrosion 

protection of Oil, Gas, Petrochemical, and Waste Water underground or 

overhead pipelines. The outer-layer tape backing shall be compounded 

so that it will be resistance to outdoor weathering.

The outer-layer tape shall be applied after the inner-layer tape 

by hand or with a wrapping machine.

Outer wrap tape also be called outer layer protection tape, pipe wrap tape,

polyethylene adhesive tape.

 Polyethylene single side adhesive outer tape corrosion protection for pipesis engineered

to achieve a complete bond to the inner layer tape, providing maximum

handling and in-service protection for the coating system.

Polyethylene adhesive outer tape corrosion protection for pipes  series is

Cold applied tape coating system for corrosion protection of Oil, Gas,

Petrochemical,

andWaste Water pipeline. Pipe can be buried, underground ,

overhead ,onshore and offshore .
Our Company:

We manufacture polyethylene coating by utilizing butyl based elastomeric adhesives, Polyethylene films and liquid adhesives for corrosion protection of steel pipes.

Our company provides corrosion protection with the inherent chemicals of polyethylene and butyl adhesive for water resistance and oxygen penetration. Oxygen and Water are prevented from reaching the metal substrate. They are the necessary and sufficient conditions for corrosion.

We manufacture conventional and special polyethylene, polypropylene and polymeric alloy and coating systems for pipe corrosion protection. We manufacture PE coating systems for the applications of new pipe construction, rehabilitation and reconditioning. Our products are ISO9001 approved and are in accordance with other good manufacturing and technical standards and norms in the energy and pipeline industry. Coating systems have a broad range of temperature and shearing resistant properties to meet the requirements of pipeline end-users.

QQ:2934034518
Skype:nancysong7
008613791713064(whatsapp)