Description
Brief Introduction:
Hammer Crusher is mainly used for crushing medium-hard or brittle
materials with hardness not more than **0Mpa and *5% moisture, such
as coal, cement, gypsum, alumen, brick, tile, limestone, etc. It
has the features of simple structure, big crushing ratio, high
production efficiency, uniform particle size, etc. This
equipment can be adjusted to reach various discharged granularity
as the customers' requirement.
Features:
1. Easy installation and maintenance.
The ring type hammer is easy for installation, and when it is
damaged, we only need to open the cover and turn around it, little
overhaul and maintenance work needed.
2. Developed structure and long service life.
Our Hammer Crusher adopts ring type hammer to adjust position
automatically, which is a developed structure that can avoid
dangerous cross section. Good performance of preventing iron
blocks makes service life improved greatly.
3. Difficult deformation with high strength.
The sieve pore is changed from circular to strip, which makes the
sieve staggered in order to increase the intensity of sieve plate.
After processed, the screen body is difficult to deform and
damage. As a result, the life of screen body can be increased
up to **6 months.
4.Unblocked material flow and large production capacity.
The frictional resistance of material filtering can be reduced
greatly by the improved sieve plate. And the feeding frequency can
be adjusted according to the operation requirements, so the
production capacity is improved.
5. Smooth and reliable performance.
At one end of the spindle is a flywheel equipped. The
rotor will have kinetic energy stored, used to reduce the peak load
of the motor and the wear of hammer head, to make it work stable
and reliable.
6.Low consumption of spare parts and low maintenance costs.
All wearing parts are made of high quality wear-resistant
materials. Some of the wearing parts are made of special hard
wear-resistant materials. Long service life greatly reduces
maintenance costs.
Technical Parameters:
ModelRotor speed (r/min)Input opening size(mm)Max. feed
size(mm)Discharged size(mm)Capacity (t/h)Power (kw)Weight
(t)Overall Dimension(L×W×H)
(mm)Φ**0×*********5×*************7.*0.***4×**2×**8Φ**0×*********5×****************8.*1.*****4×**2×**1Φ**0×*********5×*****************2.*****5×**0×**0Φ**0×*********0×*****************2.*****5×***6×*0Φ**0×*********0×*****************3.*****5×***1×*0Φ***0×*********0×******************6.****6×***0×*5Φ***0×*********0×*******************7.****4×***0×*5Φ***0×********0×*******************1.****0×***0×*0Φ***0×********0×*********************3.****0×***0×*0Φ***0×*********0×*********************7.****0×***0×*3Φ***0×*********0×*********************2.****0×***0×*6
