SGLD Series automatic change-over swtich

Description

changeover switch with box,change over switch with box,power switch box,automatic changeover switch,ATS,isolation switch box

SGLZ isolator isolation switch/isolation/switch isolating
isolation switch(Manual transfer switch)SGLZ***5~***0A.
1.suitabled for the changeover of two sets of low voltage electric circuit or the changeover of 2 setof ON-Load devices or safety insulation.
2.Modle of operation:Direct operation:Handle is installed on the switch.
3.Operation outside the board:Handle is installed outside the door of power distributing board.
4.Products with observation windows can be provided according to the demand to observe directly the ON and OFF status of contact.
5.The products have three poles,four poles and (Three+ON and OFF Neutral pole).
6.Extended shaft is used for the operation outside the board.Two sets of auxiliary contacts can be assembled according to the demand.
7.Mechanical property and electric property correspond to the mechanical property and electric of SGLZ **5~***0A.
8.A bridge can provided to content the inlet or outlet terminal of the switch.
9.Note:The bridge connection is chosen,and explanation is needed to indicate the inlet or outlet is connected with it.**5~**0A is suitable for the ON and OFF of electric circuit insulation.Those over ***0A are only suitable for electric insulation.**5~**0A possess three poles and four poles(Three pole +ON or OFF neutral pole).