Description

T Series solvent recovery machine has the following characteristics: (water-cooling)
1、Machine and components using explosion-proof safety design, products have past the China national explosion-proof supervision and inspection center inspection qualified product system
Certificate of Conformity: GYB****3X; Explosion proof mark: ExdeIIBT3 / T4
2 intelligent digital PID control system
Autonomous and independent research of PID control system,automatic digital display control. The *2 section controls the heating temperature accurately. Multi - program control can be set up for recycling different solvent.
3. Specially designed electronic control box
Characteristics of explosion-proof operation mechanism, the security parameter can be set up without opening the control box , it issuitable for operating in an explosive-proof atmosphere!
Unique heating and steam electric control box display windows. (in the course of running, the electric control box is prohibited toopen under any circumstances)
4. Independent seal design
The sealing ring of solvent recovery machine is produced independently-molding,which ensure that the solvent gas solvent does not cause leakage and risk. Under normal operation, the washer is guaranteed for three years
5 the shutdown function of temperature-setting:
The temperature shutdown set, the solvent is finished or the temperature probe cannt feel the solvent vapor, the device will automatically shut down.digital sensors, high precision, can be set to a low of 5 degrees off.
6 timer function:
Pre-set recovery time ,when the machine running time reaches a preset length of time, the device will stop heating system. when the fans continue to run for about *0 minutes, the device will automatically shut down. This function is to prepare for when there is residual vapor within barrel, the steam from the pipe will run out causing safety problems if the power is cut off.
7 ultra-high temperature protection:
Preset maximum heating temperature, when the heat transfer oil temperature reaches a preset maximum temperature, the high temperature protection red light will be on and the heater will stop heating. This feature effectively prevent the temperature is too high.
8 pressure protection function:
In case of pipeline blockage, steam will not be discharged through the steam pipe. When the pressure exceeds 3KG, the valve will automatically open to relief the pressure.
9 temperature control system damage protection:
In the process of operation, if something wrong happen,for example,temperature controller is damaged, or the sensor wire is damaged, the device will automatically stop working. When the recovery start again, the device will not run to avoid sovlent completely evaporate or accidence due to the continueously heating.
 
Optional features: You can choose a variety of functions and combine your needs reasonablely in order to achieve the desired treatment effect. There are air-cooling、water-cooling, under slagging ã€ dumping type, vacuum decompression pump, automatic feeding, continuous feeding type, etc. If you have any questiong, please feel free to contact us, thank you !