Description

Bipolar crusher
 
 Description:
 
1.The two-stage crusher double rotor poles are crushing .
 
 Mutual series two sets of rotors, the rotor to crush the will after material is rapidly rotating lower rotor using  hammer in a crushing cavity material, such a rapid collision each other, smash each other, so as to achieve the hammer powder, powder material effect, and then directly discharged.
 
 
 
2.Without screen plate, wet material with high moisture content, never plug .The traditional mill with grate plate, so don\'t adapt to the moisture content higher than 8% of the raw material, when the water content is higher than that of their raw materials *0%, extremely easy blockage, makes the hammerhead can not rotate, the inside materials can not be discharged smoothly, some even burning motor, serious impact on the production of.
 
 
 
Design crusher double stage no grate plate, no strict requirement for water containing materials, does not exist completely material paste plugging sieve plate problems, the more there is no can not be discharged in a fine powder, repeat grinding problems, high crushing efficiency, there won\'t be a hammer is invalid, wear phenomenon.
 
 
 
3.The two-stage crusher wear resistant composite hammer.
 
The use of high alloy wear-resisting hammer, the hammer handle combination to use, only change hammer, don\'t change the hammer handle.
 
 
 
4.The two-stage crusher double rotor two comminuted, yield, grain size below 3 mm, 2 mm below accounted for more than *0%.
 
 
 
5.The two-stage crusher hydraulic electric start shell.
 
Only need one, it would be easy to open, close, not only light and quick, but also safe and reliable, easy to repair.
 
 
 
6.The two-stage crusher unique adjustable gap technology
 
7.Hammer without repair after worn, it will move the position is used repeatedly, a hammer can top three deputy hammer.
 
 
Working principle:
the two-stage crusher with double motor driving, the two mutual connections rotors are high-speed rotating at the same time, the materials input machine will immediately crushed by superior rotor and then fine crushing by lower rotor. Material rapidly collide with each other to be hammer powder and reach the effect of powder material, and quickly forms a discharging granularity of coal cinder particles is less than 3 mm. Ourcrusher in much degree solves the phenomenon of material moisture and the jam. It can normal use and produce in safety in the thunderstorm day!