Description

RAM Extruder For PTFE Rod(Φ*****0mm)
This PTFE extruder is able to extrude rod which dia from *0mm to **0mm. The automatic 
production line is controlled by computer, which is really easy to operate. Meanwhile, the 
plastic extrusion machine is advance designed, high output, low energy consumption, 
long-life, and also our professional engineer is available to offer overseas after sale service.
We can solve various problems to improve the equipment efficiency for you.
Ram extrusion machine for Teflon rod
The China vertical RAM Extruder is designed with 2 pressure plates, so the ream is affected 
via a slid pressure plate. The China rod ram extruder is equipped with two hydraulic cylinders.
The main cylinder serves to move the ram; the additional cylinder serves for retracting the
mandrel. Base plate and dosing tray are water-cooled.
The PTFE powder is feed into the rotating hopper via an exact working powder dosing device, 
controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly 
into the cavity of the mould.
Range of diameter PTFE Extrusion *0 to **0 mm, Heating zones 5 zones
The complete electrical control is laterally fastened at rod ram extrusion. With a PC touch screen 
panel all speeds and temperatures can be programmed. Electronics contain the necessary 
automatic controllers for speeds and temperatures. Five temperature regulators are contained 
in the plant, four for the extruding pipe and one automatic controller for a mandrel heating
element. The maximum output speed of PTFE extrusion depends on: PTFE Material, outside 
PTFE rod diameters and PTFE product heating length.PTFE Equipment Warranty: according
to our standard terms: *2months
Technical Specification:
PTFE Rod Extruder Dia *0mm***0mm


Technical Data