Description
Servo sprayer
Servo sprayer is the latest research and development of Shenzhen
City, City Xin Ming Machinery Equipment Co., Ltd. is the latest
research and development of automatic hydraulic cutting edge
equipment, is the production of automatic mechanical equipment
manufacturing enterprises around the periphery. Product type:
automatic sprayer.
Servo sprayer:
1 vertical motion is driven by a servo motor. The horizontal motion
is driven by a frequency conversion motor (which can be used to
control the longitudinal motion and the transverse motion. The
servo motor is controlled by a servo motor. And at any point of
standby, shorten the spray cycle.
2, each row of fixed mold spray, a row of air blowing; increase the
nozzle flow control according to customer requirements.
3 head parts of each side (dynamic and static mode) of the nozzle
group are controlled by 3 units. Each unit can be randomly
controlled, spray volume and spray time can be adjusted, the
interaction between the unit and the unit is not affected, the
nozzle is used in the form of universal joint, can be manually
adjusted within *5 degrees.
4, static model can also blow, moving, static mode control alone.
Don't blow in spray state, under the condition of spray
blowing.
5 rose blowing function, can make the cleaning mold on the surface
of the dirt in at the same time to complete the rise, make the die
face clean.
6 the designer has an anti drop device to prevent the drop of the
nozzle when the power is off.
7 control box has a signal to set aside, can be with the die
casting machine semi automatic operation, but also with the die
casting machine, removing machine and other connections, become
fully automated equipment.
8 the man-machine interface touch screen, which can be easily set
to all kinds of parameters, can be the output of the device, the
status of the input point, the machine state monitoring and fault
diagnosis with the function of the fault diagnosis and
maintenance.
9 can be according to the requirements of the system to increase
the storage of multiple sets of mold spray procedures, the use of
the replacement of the mold, making the operation and maintenance
is very convenient.
*0 all of the power line control line of the surface of the
waterproof and anti - iron pipe, the pipe and the connector of the
electric box are threaded seal.
*1 in a program can include a cycle spray, spray, spray, spray,
moving mode static mode separate spray.
*2. The spray head can any stay, before opening nozzle to even
above the mold, spray finished shower heads and even above the mold
mold clamping, recycling, saving time.
*3 this spray machine has two working modes: manual, automatic, so
that the follow-up maintenance.
Product features:
1 each driving part adopts the servo control mode or similar servo
control mode to achieve the servo effect.
2 precise point positioning.
3 spray nozzle can be installed in the traditional focus of the
spray head, more can be configured with high precision servo
nozzle, the nozzle at random control.
4 high speed driving, can be set by the customer in the mold in the
spraying times.
