Product description for Distillation theory

This technology utilized catalyzing treatment during chemical processing. Our company developed a kind of composite catalyst, through catalyzing, the harmful substances are selectively processed, for example, polymerization, shielding, passivation effect and discharged as residues, so as to remove the unstable factors of the waste lubricating oil, make it became qualified lubricating base oil.

This technology is different from the traditional distillation process with sulfuric acid,it is also different from the current hydrogenation technology. The process of this technology is: Catalyzing treatment of waste lube oil (including gasoline engine oil,diesel engine oil ect. almost all sorts of recyclable waste oil), and then distill to new lube base oil. The oil will not mean to oxidate and change color, no odour. The residues can be used as fuel, it will not make secondary pollution. This technology is high automatic, the operation is simple, no complicate operation control, easy to learn and understand, low labour intensity, 1-2 persons are enough and no special requirement.

The used oil is mixed with catalyst in chemical treatment tank, then it is sent to distillation kettle to have it circulated and heated, while the temperature increasing, the oil gas is distilled out and cooled in to liquid through three stages cooling, theyre separately stored in water, gasoline/diesel, light lube oil, heavy lube oil receivers. The noncondensable gas will be sent to the furnace of boiler to have it burned and discharged after pass through waste gas disposer to ensure zero discharge of waste gas, The residues can be utilized as fuel to avoid pollution from it.

Its easy to produce waste residue and bad smelling by traditional vitriol distilling, which will bring potential secondary pollution, moreover, its easy to change the color to black and produce the odor due to the recycled oil react with the oxygen. But after we use the alkaline complex catalyst refines the oil, the recycled oil havnt change the color and havnt create the odor. Whats more important, you can use the resid to be as the fuel to heating the oil, without any pollution. And the machine is easy to operate, only 1-2 workers can control the machine.

Features:

1. Easy to operate, low operation cost

 2. Environmentally friendly, without secondary pollution.

 3. The machine can recycle gasoline oil, diesel oil, engine oil, rubber oil and other lubricant oil to clean oil.

 4. High quality refined oil, no any discoloration caused by oxidation, no any bad smelling.

 5. Low cost contain:

   1) only need the catalyst chemical, the cost is less thanUS$30 to refine one ton waste oil.

 2) Heat consumption: 105kcal per ton waste oil

 3) Power consumption: 40Kwh to recycle 1 ton waste oil

 6. High degree of automation.

Recovery Rate:

Treated Oil analysis (take the waste diesel engine oil for example)