3.5 inch COB LED Adjustable Recessed Downlight

Description
3.5 inch LED recessed fixtures with round apertures offer energy-efficient, precision lighting for accent, task, or wall wash applications.
This type LED luminaire approximates the performance of *0W halogen, but at only **-watts input, consumes just one-fourth the energy.
Featuring unique high-low lamp positioning feature, the innovative design allows the LED to be positioned closer to the aperture for maximum light output and efficiency or higher to minimize glare and flash on the trim.
Additional adjustability allows for tool-free hot aiming and locking including 0º**0º tilt and **8º rotation while always maintaining center beam candle power.

Features
Separable rotating reflector design makes it easy for replacement.
With precision optics and adjustments, luminaires put exactly the right amount of light in precisely the right places.
Universal **0V***7V driver with optional ***0V standard dimming protocol.

Housing
Heavy duty black powder coated *8 gauge steel frame.
Designed for New Construction installation
Housing can be installed in 2" thick ceilings
Housing types include IC Air-Tight or Non-IC Rated (must specify).
Junction box and driver are located on opposite ends of the housing, with easy access for maintenance and installation.

LED Light Engine
***0 Lumens Max.
***0K, ***0K, ***0K and ***0K *2 CRI
***0K and ***0K *0 CRI
LED mounted to die-cast / extruded aluminum heat sink w/ active cooling
*0,**0 hours average rated life at *0% output
LED light engine, SynJet and driver are all accessible from below the ceiling

Optics
*2° Spot, *4° Narrow Flood and *6° Flood

Adjustability
Precision geared hot-aiming achieves **8° rotation, *0° tilt.
Optimized center beam optics translates light engine forward as it is aimed off nadir

Trims Style
Open Reflector
Baffle
Pinhole
Wall Wash
Reflector with Lens

Installation
Housing types include IC Air-Tight, CCEA (Chicago Plenum), or Non-IC Rated (must specify). Non-IC rated housings must be kept at a minimum of 3 away from insulation.
Butterfly brackets and adjustable hanger bars (****5) with integral nail included.
Butterfly brackets are compatible with C-channel, flat bar hanger and EMT. C-channel is recommended for T-bar ceilings.
C-Channel and flat C-Channel and flat bar hangers must be ordered separately. 

Emergency
Remote test switch included.
Emergency driver operates LED load of up to 7.0 Watts at a maximum rated current (**0 mA) for a minimum of *0 minutes.

Listing / Warranty
ETL listed to US and Canadian standards for damp location W/Feed through
*0 Year Limited Warranty.