A. Equipment characteristics:
Temperature control adopts OMR tem-control module, 8" touch screen displaying
Traction force, traction speed touch screen displaying
Sealing elements of hydraulic cylinder is imported, every traction head has separate hydraulic system.
Hydraulic traction device is auto or manual. The traction speed and clamping force is adjustable.
Traction machine has the pause function and easy to clean the mould.
The equipment plate does spurts models processing.
B. Technical parameter:
Line working voltage: **0V/*0Hz PLC working voltage: AC**0V/*0Hz
Power system voltage fluctuation within ± *0%
Total power: About *8KW (not including mould heating)
Working condition: Dry space without corrosive gas and dust
Environment temperature: ***0ºC relative humidity ≤ *0%
Circulating water: Clean cold water
1. Calibrating table
Calibrating table plate: ***0mmx***0mm
Calibrating mould length: **0mm
Temperature zones: *4
Heating plate (optional): Steel plate or cast aluminum plate
Dimension: ≈ 5mx2mx1.7m
2. Traction machine
Number of traction head: 2
Clamping scope: ***0mm(W)x**0mm(H)
Max traction force: **0KN
Traction speed: 0.***0.*6m/min
Clamping force of traction head: **0KN
Clamping journey: ∮***0X**0mm
Clamping cylinder: ∮**0x*0mm
Power of cylinder: 7.5x3KW **0V/*0Hz
Oil temperature cooling: Circulating cooling water water pressure>1.5bar
Dimension: ≈ *1mx2mx2.4m
3. Cutting saw
Cutting scope: ***0mmx**0mm
Cutting power: **0V/*0Hz 2.2KW
Tracing cutting, free length fixed
Cutting speed: Stepless speed adjustable
Dimension: 3.5mx3.2mx2.5m
C. Main components configuration
1. Electric elements
8\' touch screen, PLC and tem-control module are all from Omron, Japan.
Electric heating control adopts contactless heating (solid-state relay).
General controlling elements use Huyun brand, Zhejiang, China.
2. Hydraulic components
Hydraulic pump adopts V*8 variable piston pump.
Hydraulic change valve is from NORTH MAN, Taiwan
Speed regulating valve is DAKIN, Japan.