Description
~D***0amplifier
Technical parameters ***0W Power
Amplifiers
Rated power(1KHz,THD+N=0.1%) 8ohm
stereo 2×***0W
4ohm stereo 2×***0W
2ohm stereo 2×***0W
8ohm bridge ***0W
4ohm bridge ***0W
High and low
BYASS
*0Hz**0kHz(±0.3dB)
frequency divider LOW
PASS
*0Hz***0Hz
HI
PASS
*0Hz**0kHz
Signal to noise ratio *0Hz**0kHz ≧**0dB
Distortion degree *0Hz**0kHz,Half
Power ≦0.*5%
Conversion rate Rated Power into
8ohm *0V/µs
Damping coefficient
8ohmã€1f=1kHz ***0:1
Sensitivity Rated Power into 8ohm 0.**5V / 1.0V /
1.*4V
Separation degree Rated Power into
8ohm ≧*5db
Input impedance balanced/unbalanced *0K ohm/
Unbalanced,*0K ohm/ Balanced
Amplifying circuit type Class AB H class H
class H class H class
Protection function Have perfect protection
function 1.have a boot soft start protection, prevent the
impact on the horn.
2.have input overload protection, prevent signal input
is too big,
with functions of automatic
clipping.
3.have over-current protection, as a result of special
circumstances,
the loop current is too large, automatic
protection.
4.have output short circuit protection, if the output
short circuit,
with automatic protection
5.have power transformer overheating protection, has
the power
tube overheating
protection.
Package size (W * D *
H) cm *0**2**1
Gross weight kg *2KG
Net weight kg *9KG
