Description
~MS series products technical
parameters
models MS**0 MS**0 MS**0 MS***0 MS***0 MS***0
Rated Power(1KHz,THD+N=0.1%) 8ohm
stereo 2×**0W 2×**0W 2×**0W 2×***0W 2×***0W 2×***0W
4ohm
stereo 2×**0W 2×**0W 2×***0W 2×***0W 2×***0W 2×***0W
2ohm
stereo 2×**0W 2×***0W 2×***0W 2×***0W 2×***0W 2×***0W
8ohm
bridge ***0W ***0W ***0W ***0W ***0W ***0W
4ohm
bridge ***0W ***0W ***0W ***0W ***0W ***0W
Frequency
response BYASS
*0Hz**0kHz(±0.3dB)
LOW
PASS
*0Hz***0Hz
Hi
PASS
*0Hz**0kHz
Signal to noise ratio *0Hz**0kHz ≧**5dB
Harmonic distortion *0Hz**0kHz.Half
Power ≦0.*1%
Conversion rate Rated Power into
8ohm *0V/µs
Damping coefficient
8ohmã€1f=1kHz **0:1 **0:1 **0:1 **0:1 **0:1 ***0:1
The input sensitivity Rated Power into 8ohm 0.**5V / 1.0V
/ 1.4V
Degree of separation Rated Power into
8ohm ≧*5db
The input impedance balanced/unbalanced *0K ohm/
Unbalanced,*0K ohm/ Balanced
Amplifying circuit type Class AB H class H
class H class H class H class
Protection function Have perfect protection
function 1.have a boot soft start protection, prevent the
impact on the horn.
2.have input overload protection, prevent signal input
is too big,
with functions of automatic
clipping.
3.have over-current protection, as a result of special
circumstances,
the loop current is too large, automatic
protection.
4.have output short circuit protection, if the output
short circuit,
with automatic
protection
5. have power transformer overheating protection, has
the power
tube overheating
protection.
Power triode Original United States A Morimi
brand MJL****3/MJL****4
The power supply
**0V/*0Hz
The outer packing
size cm *0**0**6cm *0**0**6cm *0**0**6cm *5**0**0cm *5**0**0cm *5**0**0cm
The weight of
the KG *0 *6 *0 *5 *6 *1
