Description

ENERGY SAVING SYSTEM - SUMMER SALE!!!!!!!!!!!!!!!!!!!

FridgeSaver Made in England, UK provides Energy Savings *5 **0% of Refrigeration Energy Consumption by EnviroTech with distributors in Abu Dhabi, Dubai, Sharjah, Ajman, U.A.E, Saudi Arabia, Kuwait, Oman, Egypt and Bahrain.

ETL FridgeSaver Energy Saving System is designed and made in England, UK is designed to monitor your produce temperature within your refrigeration systems and to ensure it is cooled within accepted guidelines of product temperature, saving up to *0% of Energy Consumption andElectricity Costs and ideal for improving or obtaining LEED or Estidama ratings.

Simply insert any kind of temperature  probe or refrigeration safe thermometer into the specially formulated produce simulant inside the FridgeSaver. Now you will be recording the temperature of produce (similar to placing the probe or thermometer into any piece of produce in the refrigerator).

The FridgeSaver simulant will last for many years and will not wither or dry within the specially designed refrigeration safe container, the FridgeSaver system is certified to stay at the same temperature as produce (within 2 degrees F below and 5 degrees F above of produce temperatures, which is a widely accepted variance in the food industry).

Use it to control your refrigeration cycles:

Simply insert your Air on/Air Off probes into the FridgeSaver and your refrigeration will now respond to Certified Product Temperatures and not Air Temperature.

The FridgeSaver is certified as operating at precisely the temperature of produce there is no guess work, no maintenance, no control issues, allowing you to set your Set Point correctly and leave the rest to the Fridge Saver.

This approach has proven highly effective on a wide range of commercial refrigeration, including PAC systems.

The FridgeSaver is not a replacement for proper servicing and management of your refrigeration, you will always get a better energy saving percentage from Fridge Saver from well maintained equipment.

The FridgeSaver helps to ensure your refrigeration equipment maintains a good service condition for much longer by substantially reducing the work load on the refrigeration making the refrigeration run more effectively and efficiently.

Always ensure that all Air On/Air Off probes of any refrigerator or refrigeration system you wish to control are fitted to an individual FridgeSaver unit.

Cold Rooms and Multi decks in particular might use more than one air probe meaning that additional FridgeSaver`s may be required.

Remember that FridgeSaver is not a remedy for inefficient refrigeration eg. If your refrigeration is operating in a wind tunnel, has blocked air returns, leaking refrigerant systems, faulty door seals or undersized systems.

Once the FridgeSaver is installed you can forget about air temperature, as the rise and fall of air temperatures are now irrelevant. The produce temperature is now the only issue and any assessment of the refrigeration should be made on this basis.

Always follow the FridgeSaver installation instructions.

This system is compatible with other monitoring devices.

Installation of FridgeSaver on refrigeration must be carried out by a refrigeration engineer. Whilst the FridgeSaver is simple to install, refrigeration is paramount to Food Safety therefore, it is important that a qualified engineer is engaged in the installation.