FOB Price
Get Latest Price|
Minimum Order
Place of Origin:
-
Price for Minimum Order:
-
Minimum Order Quantity:
10 Gram
Packaging Detail:
50g/bottle
Delivery Time:
3~5 days
Supplying Ability:
300 Kilogram per Month
Payment Type:
T/T
連絡先担当者 Ms. Zhang
Dahe, Shenzhen, Guangdong
| Type of substrate | Firing range |
| Ceramic | 760℃～840℃ |
| Tile | 760℃～820℃ |
| Glass | 520℃～600℃ |
| Fault |
Possible Cause | Remedy |
| liquid products stick to the brush | liquid product is too thick. Solvents contained in it are evaporated too much. | add thinner and seal the can well. |
| cracks | too fast when lining; the surface of object decorated is not dry and clean enough | slow down the speed when lining; keep the surface of object decorated dry and clean |
| gold color is bluish and through the end of the metal layer | too
much of thinning added too thin when lining |
control the addition of the
thinner; keep the certain thickness of metal film |
| bad adhesion | firing temperature is not high
enough liquid product is too thin and too thin when lining |
increase firing temperature control its thickness |
| matt surface | the object to be decorated is not clean and dry | keep the object to be decorated is clean and dry before lining |
| â—　Reduced atmosphere in kiln â—　insufficient ventilation â—　heat increase is too fast during　critical phase　between300~400℃ â—　too many pieces in the kiln |
â—　increase air addition â—　improve ventilation â—　reduce the heating speed â—　reduce the number of pieces in the kiln |
|
| spots and impurity | contains impurities cross contamination |
pay
attention to the working environmental sanitation; make sure liquid
product is not contaminated during lining the decorated object is not contaminated. |
