Description

SBS(Styrene Butadiene Styrene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as styrene butadieneSBS), reinforced with polyester or fiberglass, finishing the upward facewith fine sands, mineral slates (or grains) or polythene membrane, etc.
features:
1. Good impermeability.
2. Possess good tensile strength, elongation rate and size stability which could be well suited the substrate distortion and crack.
3. Good performance in anti-puncture, anti-broken, anti-resistance, anti-erosion, anti-mildew, anti-weathering.
4. Construction is convenient, the melt method can operate in four seasons, joints are reliable
5. It has good waterproofing and ageing-resistance function, not flowing at highest temperature and no crack at lowest temperature; no pollution, and long service life, etc.
6.SBS modified bitumen membrane is specially applied in the cold area with low temperature resistance. 
Application
1. Roof and underground in industrial and civil buildings;
2. bridge, subway, tunnel, swimming pool, etc.
3. Waste landfill, sewage plant, irrigation system, etc.
Storage instructions:
1.When storage and transport, different types, specifications of the products shall be separately to each other, should not be mixed. Storage temperature should not higher than *0 degree, stand up storage, a height of not more than two layer.
2.In the normal storage, transport conditions, storage period since the production date for a year.
Other Information：We will be at your service immediately once you submit your requirements online to our email. We are here to expand your business & accomplish your business goals.
Product Specification规格，说明书
1. grade: â… /â…¡ 
2. reinforcement:PY/G/PYG
3. size: 1x*0m per roll, the length can be customized 
4. Type surface: PE film, Sand, Schist, Aluminum foil  
5. thickness: 3mm/4mm/5mm   
6. width: ***0mm     
 SBS[confirming to GB*********8]