Description
Product description:
Model:Z-202
The product is used for dehumidifying under normal temperature and
pressure which is comply with the storage requirements of hearing
aid and electrical cochlear.
1.Powerful
drying: Special connection structure, good air
tightness; special moisture absorption formula to suck out moisture
and chemically harmful gases from hearing aid and electrical
cochlear surface; strong moisture absorption
ability.
2.More
secure: physical moisture absorption under normal
temperature and pressure, complying with the storage requirements
of hearing aid and electrical cochlear
manufacturer.
3.More
humanized: simple operation and easy to carry;
safeguarding your hearing aid and electrical cochlear whenever and
wherever possible with sound and light alarm
function.
4.Special
design: Fool-proofing design, no power connection need
during safeguarding the hearing aid and electrical cochlear,
avoiding the impact of electromagnetic field and hazards caused by
high temperature; independent mechanical humidity dial design,
truly reflecting humidity.
5.Energy
conservation and environmental protection: Low power
consumption; using molecular sieve hygroscopic material that can be
recycled.
6.Changing
magic box: It can change and expand, to truly achieve
multi-use with one box.
Technical Parameters:
|
|
|
|
|
|
|
Product Name |
Hearing aid dryer |
Product Model |
Z-202 |
|
|
Average Power |
12W |
Patent Number |
201520035094.6 |
|
|
Rated Voltage |
220V 50HZ |
Outer Size |
84*84*120mm |
|
|
Effective Size |
78*33mm |
Effective Volume |
Not less than 150ml |
|
|
Net Weight(N.W) 310g±5 |
Gross Weight(G.W) 370g±5 |
|
|
|
|
|
Description of Hygrometer:
Use mechanical humidity display dial under precision verification,
which can visually know the storage
condition.
Pure mechanical design without connection with the circuit,
avoiding counterfeit and truly reflecting the humidity condition in
storage box.
Observe the condition of hygrometer during storage;if the
hygrometer gauge pointer approach or in the red area, it means the
storage box requires another powering on and humidity
elimination.
Instructions:
1. Take out of the dehumidifying seat,connect the power wire to the
dehumidifying seat, and then connect the power wire to AC power
supply with output voltage of 220V. The system automatically
checks, the green light is on and then it works
normally.
2. After powering on and working for about 1h, the green light
turns off automatically, the red light turns on immediately
and the buzzer sounds; in such case, please cut off the AC power
supply at once, and then unplug the power cord connecting to
dehumidifying seat.
3. When humidity elimination is completed, put the dehumidifying
seat for a period of time,take off the storage warehouse after the
dehumidifying seat is put for a period of time, cover on the
dehumidifying seat and tighten. Put the products into storage
warehouse and mount the box cover.
4. Observe based on the local climate, and repeat the above action
if the hygrometer gauge pointer approach or in the red
area.
