Description
Four-color ink UVS series of ads
Four-color ink UVS series of ads is to be able to meet the
high-speed printing UV UV-curable screen printing inks, the product
has good adhesion, flexibility, bright colors, excellent weather
resistance and other advantages.
Scope: apply to all types of soft plastic sheet printing, PP
synthetic paper, PVC stickers, gold and silver cardboard
Product Content: UVS****3 four-color yellow, UVS****3 four-color
red, UVS****3 four-color blue, UVS****3 four-color black, UVS****0
varnish (descending creams), UVS****0 full-page Finish oil.
inks Product Features:
a, UVS series of four-color ink has excellent adhesion, low odor,
good flexibility, good printability, dot clear, colorful.
b, tinting strength (**0% ***0%), the fineness ≤5um, light
resistance (**8), outdoor weathering for three years can
c, good curing speed, 3.5KW, *0M / MIN can be completely cured,
printed product has a very good flexibility, trapping four or five
times after folding edge does not burst
d, after UV curing inks, alcohol-resistant, good water
resistance.
e, ink, bright color, high gloss, no surface and then covered with
varnish.
pad printing ink Technical Parameters:
Test items
test result
Test Conditions
Ink fineness
≤5μm
Fineness gauge
Curing conditions
OK
3.5KW UV light, *0m / min, tack
Alcohol resistance
good
**0 Chris, *9.6% of the alcohol wipe *0 times missed the end
Adhesion
OK
3M adhesive tape test
Colour
≤1.5
Separation device
Printability
OK
******0 mesh printing test
Weather
**8
Weathering Tester
Instructions:
a, UVS series of four-color UV ink is generally used directly, can
not be mixed with other ink
b, lowering the viscosity can add UVS***6 Thinner
c, lower color density can be added drop Segao UVS****0, according
to the proportion added, without any side effects
d, an increase hiding or dilute color vividness can be adjusted
plus white ink.
e, UVS series ink applied to fully automatic screen printing
presses, semi-automatic screen printing machine, printing
performance is good.
Attention to the problem:
a, black ink purple line penetration at the poor, it is recommended
on the first color printing; color sequence is: black ink / blue
ink / Red Ink / yellow ink.
b, temperature *0º**5º appropriate, pressroom generally best to
install fluorescent tubes.
C, although the composition of the ink is low irritant, but try not
to use skin contact, if the glue should immediately wash with soap
and water.
Note: the above the resistance test result data of the company
under the experimental conditions tested, not as a guaranteed
value.
