Â
HCW*7.5 Hydraulic cable spooler is
used for pull out and receives cables, consisting of a set of
hydraulic drive system, power distribution system, hydraulic
station system, hydraulic drive system, planetary gear reducer
system, lifting system and frame support system, etc. Hydraulic
retractable machine is equipped with shuttle valves and balance
valves. Shuttle Valve is used to control brake and balance valve is
used to prevent the winch from dropping due to its body weight; and
keeps it running in a steady speed. Therefore, the hydraulic winch,
with stepless change lifting or lowering speed, is in good
performance at starting, smooth operation, safe and reliable, easy
to install, excellent anti bittern corrosion, anti-seawater
erosion, provide additional power supply requirements. It can be
widely used in the oil field, offshore platform, and some other
sectors with cable laying and receiving process.
Â
Specification
Â
Code No: |
HCW*7.5 |
 |
Cable
Winch |
Supply and
distribution systems |
 |
Winch size: |
***0****0mm |
Input vector: |
AC**0V(*0Hz) |
Winch speed: |
***5rpm |
Current-consumption: |
*5.4A |
Driving Mass: |
*0T Max. |
Output voltage: |
AC**0V(*0Hz) |
Output Torque.
Rated: |
***0N.A |
Anti-hazard
Classification: |
Exd II BT6, |
Output torque,
Max |
***0N.A |
Enclosure Protection
Level: |
IP*4 |
Transmission
Ratio: |
7:1 |
Anti-rot
material: |
**6L SST |
 |
 |
 |
Hydraulic pressure
system |
Device
Parameters |
 |
hydraulic system
flow |
1.8L/r |
Overall
Dimensions: |
***0(L)****0(W)****0(H)mm |
Rated Pressure: |
*6Mpa |
Weight (fill up
tank) |
***0 kg |
House Power,
Motor |
7.5kw |
 |
 |
Â
Â
Main feature
Â
Full hydraulic pressure drive,
hydraulic control, positive and negative rotation, stepless speed
regulation, shut off with hydraulic auto-brake, stable running and
easy to operate.
Hydraulic system is designed with
bypass conduit, cable winch and has positive and negative control
and it can be dragged while it is in brake.
Top quality components are
selected for the hydraulic system, its reliability is
improved.
Transmission box adopts planetary
gear reducer with low noise, small volume, light weight, easy
installation, reliable transmission.
Marine flame-proof motor and
corrosion resistant material are used for Hydraulic station
motor
Bearing stainless sitting cover
is made in stainless steel, open heavy duty, widen sliding bearing
and oil injection or greasing nozzles. It can be bearing heavy
load, easy installation and dismantling quick, convenient
maintenance.
Its frames are made with thick
wall square steel pipe in high strength and light
weight.
Power distribution system is
designed with SST **6L anticorrosive enclosure and explosion
protection switch, level ExdII BT6, suitable for well drilling or
oil production on the offshore platforms.
Control panel is simple, easy to
manipulate, secure and reliable.
Spooler frame with strong
corrosion resistance, that is processed by pre-sandblasting
cleaning first, and then using high adsorption painting and
subsequent anti-corrosion technology to increase its anti-corrosive
ability,
The "Return Tube" is used to
connect with hydraulic fuel tank to maintain the pressure balance
and prevent dust and condensed liquids from getting into the
tank.
|