Description
The scope of application
Lubricating Oil Evaporation Loss Tester Standard: SH / T***9 *5g of
lubricating oil in an evaporator and heated to **0 ° C for *0
minutes. With a vacuum pump to evaporate the oil vapor carried out
with the air flow to determine the tendency of lubricating oil
evaporation loss.
Features
1, the loss of oil evaporation tester using
imported temperature control (Omron), temperature control accuracy,
low failure rate
2, oil evaporation loss tester using imported digital
pressure gauge, equipped with a zero knob
3, oil evaporation loss tester using timing system,
when prompted to alarm
4, oil evaporation loss detector using metal bath
heating, to avoid the traditional water bath heating volatile
shortcomings
5, lubricant evaporation loss tester using
self-developed vacuum system, no noise
Technical Parameters
1, Power: AC**0V ± *0 *0Hz
2, input power: 1.4k VA
3, the ambient temperature: room temperature ~ **5 ℃
4, the output range: 0 ~ *4KVA
5, temperature control accuracy: metal bath: **0 ± 0.5 ℃
6, timing accuracy: ***0S ± 0.1S
7, temperature control instruments: intelligent temperature control
device
8, heating time: about *0nin
9, pressure gauge: *0mn ± 0.2mm water column
*0, the sensor: Ptl*0
