Description
"The scope of application
Engine coolant simulation using corrosion tester Applicable
standards: SH / T******1 The use of the instrument is: sample in a
closed system consisting of reservoir, water pump, radiator and
rubber tube, under certain temperature and flow conditions Cycle
***4h, the corrosion resistance of which is determined by the
weight loss in a reservoir of typical metal coupons used by the
engine cooling system and by visual inspection of the state of the
noodles in each part. The change in performance of a sample is
determined by periodically analyzing the sample taken from the
system during the test cycle. The instrument is suitable for engine
coolant concentrate and engine coolant.
Features
1, engine coolant simulation using corrosion
tester with explosion-proof motor and equipped with
over-temperature protection, storage cover with safety valve above
to ensure the safety of equipment operation.
2, the engine coolant simulation using corrosion
tester piston displacement of 1.6 ~ 5.0L car pumps and radiator
tank, table made of stainless steel, stainless steel screws
fasteners, easy to remove never rust.
3, engine coolant simulation using corrosion tester
imported digital temperature controller, PID tracking temperature
control accuracy.
4, the engine coolant simulation using corrosion
meter turbine flowmeter sensor, accurate and intuitive
measurement.
5, engine coolant simulation using corrosion tester
intelligent digital timer, timing accurate, half-way downtime can
show the actual running time.
Technical Parameters
1, the liquid flow rate: 1.3 ~ 1.6L / s
2, the control temperature: *8 ℃ ± 3 ℃
3, running time: ***4h
4, heating power: 2.6kw
5, motor power: 2.2KW
6, pressure instructions: *0 ~ **3Kpa
7, the whole machine power: 4.8kw
8, the working power supply: AC**0V ± *0% *0HZ
9, the whole weight: **0Kg "
