Lithium battery vacuum oven, Lithium battery vacuum drying oven.

Description

Non - standard customization


Vacuum oven, vacuum drying box is for the production of battery chips, capacitors, lithium batteries, LED photoelectric components manufacturers, new products, vacuum chamber is square, widely used in the pharmaceutical chemical, electronics, instruments, instruments and other industries, materials, parts, the whole machine, and the vacuum drying of products. The double chamber vacuum drying oven is a double-layer vacuum oven, which saves space independent temperature control vacuum oven.


The double layer vacuum drying box is designed for drying heat sensitive, easy to decompose and easy to raise oxidizing substances. It can be filled with inert gas, especially some complex components can also be quickly dried.


Equipment features:

the cuboid workshop achieves the maximum effective volume. The microcomputer temperature controller is precise and reliable in temperature control.Toughened and bullet proof double glazed doors observe objects in the studio, which can be filled with inert gases into the interior.It is able to adjust the closed tightness of the box door and synthesize the synthetic silicon door sealing ring, so as to ensure high vacuum in the box.The studio is made of polished mirror and high quality stainless steel to ensure that the product is durable and easy to clean.Shorten the heating time. Compared with the traditional vacuum drying box, the heating time is reduced by more than *0%, so as to meet your working needs.

The structure has a single door open, the choice of the door.

There are manual control, timer automatic control and PLC control.

Efficiency has door heating, rapid air cooling self selection.All kinds of products with special specifications are customized, and the cylindrical battery and the coil vacuum drying box are also used.


Product introduction:

Vacuum oven and vacuum drying box are widely applied in various laboratories and industrial fields. Vacuum oven can dry heat sensitive material at low temperature. It is suitable for vacuum drying process of LED photoelectric components, lithium battery, crystal oscillator and other electronic products. Samples with good thermal stability can be dried at a temperature of **0 or **0 degrees. The vacuum is up to **0Pa. The vent valve is arranged at the front of the box door, one in the middle and one on the right side, which is convenient for quick or slow bleeding. It is simple and easy to use, and it is a super value product that combines many functions.


Technical parameters: